Philips 26PF9966-37 - Manual (Page 3)

H
OOKING
U
P THE
T
ELEVISION
3
HD 1
5
IN FROM ANT SATELLITE IN
OUT TO TV
CH 3
CH 4
DIGITAL
AUDIO OUT
VCR
CONTROL
S-VIDEO VIDEO
in 2
AUDIO
RF
REMOTE PHONE JACK VIDEO
in 1
R
L
AUDIO
PB
PR
Y
4
HDMI
2 3
1 I f your using a High Definition receiver that can transmit high
definition programming, the TV can except those signals
through the HD Inputs located on the bottom of the TV.
1 For Digital Connection, connect the HDMI connector of
the HD Receiver (or similar device) to the HDMI Input
jacks on the bottom of the TV.
OR
2 For Analog Connection, use Component Video cables to
connect the Component (Y, Pb, Pr) Video Out jacks of
the HD Receiver (or similar device) to the VGA adapter
(supplied with the TV). Connect the other end of the
adapter to the VGA Input jacks on the bottom of the TV.
3 Connect the red and white audio adapter to RCA type
Audio Cables. Connect the audio adapter to the PC/HD
Audio Input jack on the bottom of the TV.
4 Turn the TV and the HD Receiver ON.
5 Press the HD Mode button to set the TV into the HD
Mode and tune to the HD signal.
Note: The Audio/Video cables needed for this connection are not
supplied with your TV. Please contact your dealer or Philips at
800-531-0039 for information about purchasing the needed
cables.
HD (H
IGH
D
EFINITION
) I
NPUTS
T he audio/video input jacks on the bottom panel of the TV are
for direct picture and sound connections between the TV and
a VCR (or similar device) that has audio/video output jacks.
1 Connect the AV1 In(put) cable to one end of an RCA
type VIDEO (yellow) cable to the supplied Audio/Video
adapter. Connect the other end of the Adapter to the AV1 in
jack on the bottom of the TV.
2 Connect the AV1 In(put) cable to one end of the RCA
type AUDIO (red and white) cables to the supplied
Audio/Video adapter.
3 Turn the VCR or accessory device and the TV On.
4 Press the AV+ button and the number 1 button on the
remote control to select the AV1 channel for the accessory
device. AV1 will appear in the upper left corner on the TV
screen when tuned properly. You can also press and hold
the AV+ button to toggle through the various channels until
AV1 appears on the screen.
5 With the VCR (or accessory device) ON and a prerecorded
tape (CD, DVD, etc.) inserted, press the PLAY button to
view the tape on the television.
AV1 I NPUTS
3
3
1
2
4
AUDIO IN
(RED/WHITE)
BOTTOM OF TV
VCR (or accessory device)
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
BACK OF VCR
(or Accessory device)
VIDEO IN (YELLOW)
C omponent Video inputs provide the highest possible color and
picture resolution in the playback of digital signal source
material, such as with DVD players.
1 Connect the Component (Y, Pb, Pr) Video OUT jacks
from the DVD player (or similar device) to the
COMP(onent) VIDEO Input (Y green, Pb blue, Pr red)
jacks on the bottom of the TV. When using the Component
Video Inputs, it is best not to connect a signal to the AV1 in
Video Jack.
2 Connect the red and white AUDIO CABLES to the
Audio (left and right) output jacks on the rear of the acces-
sory device to the Audio Adapter supplied (L and R).
Connect the adapter into the AV1 In Input Jacks on the TV.
3 Turn the TV and the DVD (or digital accessory device)
ON.
4 Press the AV+ button and the Number 1 button on the
remote control to select the CVI channel. CVI will appear
in the upper left corner of the TV screen.
5 Insert a DVD disc into the DVD player and press the
PLAY
ᮣ button on the DVD Player.
NOTE: When using additional accessories, only one external
source will be audible, as there is only one AV1 Input jack.
C OMPONENT (CVI) I NPUTS
4
4 S-VIDEO
OUT OUT OUT
L
AUDIO VIDEO COMP VIDEO
Pb
Pr
3
5
Y
1
2
TUNE TO AV1 CHANNEL
The description for the component video connectors may differ depending on the DVD player or accessory
digital source equipment used (for example, Y, Pb, Pr; Y, B-Y, R-Y; Y, Cr, Cb). Refer to your DVD or dig-
ital accessory owner’s manual for definitions and connection details.
H ELPFUL H INT
AUDIO CABLES
(RED/WHITE)
COMPONENT
VIDEO CABLES
(Green, Blue, Red)
BOTTOM OF TV
ACCESSORY DEVICE
EQUIPPED WITH COMPO-
NENT VIDEO OUTPUTS.
The CVI connection
will be dominate over
the AV1 in Video Input.
When a Component
Video Device is con-
nected as described, it is
best not to have a video
signal connected to the
AV1 in Video Input
jack.
AUDIO
CABLES
COMPONENT
VIDEO CABLES
(Green, Blue,
Red)
BOTTOM OF TV
HD RECEIVER
EQUIPPED WITH COMPONENT
VIDEO OUTPUTS.
Analog Connection
Digital Connection
Rear of HD Receiver (Illustration is
for reference only. Your HD
Receiver’s jack panel may be
labeled differently.
Coxial Cable Lead-in fom
Cable Outlet, Cable Converter
Box, or VHF/UHF Antenna
Coaxial cable Lead-in
from Satellite Dish or
Antenna