beautypg.com

Philips SCD560-10 User Manual

Page 20

background image

20

Why does it take some time for the battery

status indicator to appear on the display when I

start charging the parent unit while it is off?

• This is normal. The parent unit needs a few

seconds to wake up when you connect it to an

electric outlet while it is switched off. When it is

connected, the parent unit first needs to detect

that it is charging and it has to measure the

battery charge level before the battery status

indicator can be displayed.

Why do the rechargeable batteries of the parent

unit run low quickly?

• The rechargeable batteries have reached the

end of their life. You have to replace them. To

replace the rechargeable batteries, see chapter

‘Ordering accessories’.

• You may have placed the unit next to a

transmitter or other DECT appliance, such as

a DECT telephone or other 1.8GHz/1.9GHz

baby monitor. Move the unit away from the

other appliances until the connection is re-

established.

What happens during a power failure?

• If the parent unit is sufficiently charged,

it continues to operate during a power failure.

If there are batteries in the baby unit, it also

continues to operate during a power failure.

Is my baby monitor secure from eavesdropping

and interference?

• The DECT technology of this baby monitor

guarantees no interference from other

equipment and no eavesdropping.

The operating time of the parent unit is

supposed to be up to 18 hours. Why is

the operating time of my parent unit shorter?

• When the parent unit has been charged for

the first time, the operating time is less than 18

hours. The rechargeable batteries only reach

their full capacity after you have charged and

discharged them at least four times.

• The volume of the parent unit may be too high,

which causes the parent unit to consume a lot

of energy. Decrease the volume of the parent

unit

• The microphone sensitivity level of the baby

unit may be too high, which causes the parent

unit to consume a lot of energy. Decrease the

microphone sensitivity level in the menu of the

parent unit.