Philips VRX260AT - Manual (Page 2)

Video Cassette Recorder
VRX260AT
Programming & Record/Playback Features
Hi-Fi Stereo Sound with Built-In MTS/SAP Decoder
Record stereo videotapes from stereo sound sources and playback
pre-recorded hi-fi stereo tapes in hi-fi stereo sound–with an excellent
90dB+ dynamic range–through a stereo-equipped TV or regular TV and
stereo hi-fi home audio system.The built-in MTS/SAP decoder allows
reception and recording of off-air television stereo broadcasts and second
audio program transmissions, where available. Back-up memory logic
retains the cable channel guide map indefinitely even during a power
failure or when the VCR is disconnected from its power source.
VCR Plus+™ Programming
Simplifies VCR programming by allowing you to simply enter PlusCode
®
programming numbers found in many published television listings.When
recording begins, your VCR automatically selects the proper TV channel
and program length. Back-up memory logic retains the cable channel
guide map indefinitely even during a power failure or when the VCR is
disconnected from its power source.
One-Touch Record
8-Event/1-Year Smart Programming
Remote Control Onscreen Menu Programming
Picture
4-Head, Double Azimuth Design
Combines direct drive cylinder and capstan motors with precision digital
servo control to produce excellent special effects reproduction in Still
and Slow modes in both SP and SLP speeds.
Digital Auto Tracking System
When tape playback begins, this feature automatically seeks the optimum
tracking position in the tracking range, and the optimum audio signal track-
ing position for clearest picture and sound. Buttons on the remote trans-
mitter give you manual control should tracking adjustments be necessary.
Auto Head Cleaner
Gently, automatically cleans the video heads each time a tape is inserted
or removed to maintain optimum picture performance during both
recording and playback.
Convenience
Daylight Savings Timer
This menu-driven feature automatically compensates for Daylight Savings
Time changes in early April and late October so you don’t have to reset
the clock twice a year. Simply actibvate the Daylight Savings Time option
in the Set Clock menu and forget it!
Automatic Channel Setup
The VCR tuner scans through television frequencies, automatically
storing active broadcast channel into memory.Then, only active channels
programmed into memory are tuned using the channel up/down buttons
on either the remote or front panel of the VCR. Automatic channel
preset can be repeated whenever desired, should new channels become
available. Channels can be manually added or deleted.
181-Channel FS Tuning
The digital quartz tuner can receive up to 181 channels, including UHF,
VHF, and 113 cable channels, without the inconvenience and expense of a
cable company decoder/converter (on non-scrambled cable systems).
Channel tuning is by random access with the remote control transmitter
or scan tuning up and down by remote or at the set.
Clock/Function Display
Continuously alerts you to all important recording and playback conditions,
correct time, counter position, tape speed, channel number, etc.
Bilingual (English/Spanish) Onscreen Function Display
Indicates record/playback functions, channel number, clock setting, date,
counter, programming, one-touch record and record standby, keeping you
alert to the status of all features in a heads-up onscreen display.
Onscreen Real-Time Counter with Time Search
Unlike the 0000 to 9999 tape counters found in standard VCRs, this unit
incorporates a linear, real-time counter which shows elapse time in hours,
minutes, and seconds. Now you can advance or return to selected tape
segments in any time increment you desire.
Timer/Programmer Back-up System
Retains timer programming information for up to 1 full minute in the event
of momentary power interruptions.
Repeat Play
When the VCR recognizes no recorded signal or reaches the end of a tape
with the Repeat Play control activated, it automatically rewinds to the begin-
ning and enters the play mode again. Repeat Play can be discontinued by
touching the button a second time or by changing operation mode.
Quick Start Mechanism
Audio/Video Input/Output Jacks
Special Effects
15x Forward/Reverse Latching Search
Search in forward or reverse mode at 15 times normal playing speed in
SLP.The Latching Search feature provides continuous forward or reverse
search with a single touch of the control. A second touch stops the search
operation and returns the unit to the Play mode.
Remote Control
Multifunction Infrared Remote
Controls all operating features and functions of this VCR with armchair con-
venience–including all special features, random channel access, and
channel scan up/down providing an LED virtual “handshake” for confirmation.
Full Auto-Feature Package
• Power On
• Digital Auto Tracking
• Auto Play
• Auto Repeat
• Auto Rewind
• Auto Eject
• Auto Power Off
UPC: 037849853214
Product Dimensions: 14.2"W x 3.6"H x 9"D
Product weight: lbs.
Carton Dimensions: "W x "H x "D
Carton Weight: lbs.
Master Pack: 1
Contains: 4-Head, Hi-fi Stereo Video Cassette Recorder, Infrared VCR Remote Control
w/Batteries, RF Coaxial Cable, Operating Instructions,Warranty Information
Printed in U.S.A.
©1998 Philips Consumer Electronics Co.
A Division of Philips Electronics North America Corp.
KID Design 97584, Philips Consumer Electronics Co.
Subject to modification without notice
* VCR Plus+, and PlusCode are trademarks of Gemstar Development
Corporation.The VCR Plus+ system is manufactured under license from
Gemstar Development Corporation.