Faqs (frequently asked questions), Faqs – Philips LCD widescreen monitor 220V1SB 22"w V-line 1680x1050 - Format 1610 User Manual
Page 4
FAQs (Frequently Asked Questions)
• Compatibility with Other Peripherals
• Ergonomics, Ecology and Safety
• Other Related Information
FAQs (Frequently Asked Questions)
General FAQs
Q:
When I install my monitor what should I do if the screen shows 'Cannot display this video
mode'?
A:
Recommended video mode for Philips : 1680 x 1050 @60Hz.
1.
Unplug all cables, then connect your PC to the monitor that you used previously.
2.
In the Windows Start Menu, select Settings/Control Panel. In the Control Panel Window, select the
Display icon. Inside the Display Control Panel, select the 'Settings' tab. Under the setting tab, in box
labeled 'desktop area', move the slidebar to 1680 x 1050 pixels.
3.
Open 'Advanced Properties' and set the Refresh Rate to 60Hz, then click OK.
4.
Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1680 x 1050@60Hz .
5.
Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor.
6.
Turn on your monitor and then turn on your PC.
Q:
What does 'refresh rate' mean in connection with an LCD monitor?
A:
The refresh rate is of much less relevance for LCD monitors. LCD monitors display a stable, flicker-free
image at 60Hz. There is no visible difference between 85Hz and 60Hz.
Q:
What are the .inf and .icm files on the CD-ROM? How do I install the drivers (.inf and .icm)?
A:
These are the driver files for your monitor. Follow the instructions in your user manual to install the
drivers. Your computer may ask you for monitor drivers (.inf and .icm files) or a driver disk when you first
install your monitor. Follow the instructions to insert the ( companion CD-ROM) included in this package.
Monitor drivers (.inf and .icm files) will be installed automatically.
Q:
How do I adjust the resolution?
A:
Your video card/graphic driver and monitor together determine the available resolutions. You can select
the desired resolution under Windows® Control Panel with the "Display properties"
.
file:///G|/CD MANUAL/22/813/Q70G2201813 4A(220V1)/lcd/manual/ENGLISH/220V1/safety/saf_faq.htm（第 1／6 页）4/3/2009 9:47:47 AM