Philips MZ120037 - Manual (Page 19)

17
English
3139 115 21642
CD/MP3-CD Operations
Selecting a desired MP3 Album/
Track
If you want to change the album after
confirming the selection
1
Press Ç while TRACK icon is flashing.
2
Press S T to select the desired album
and repeat steps 3-6.
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 99 tracks can be stored in the
memory in any order.
If you attempt to programme more than
99 tracks, “PROGRAM FULL” will
appear on the display. In this case :
➜ The system will exit programming mode
automatically.
➜ Pressing Ç button will erase all the
programmed tracks.
➜ Pressing ÉÅ button will start the playback
of the programmed tracks.
ö MP3-CD programming
Notes:
– During programming, if no button is pressed
within 20 seconds, the system will exit the
programme mode automatically.
– The programme will be erased when the system
exits from CD source.
To erase all the programmed tracks
● In stop mode, press Ç.
Once the programmed tracks have been erased,
pressing Ç will eject the disc.
After inserting the MP3 disc,
☞
select an album
number
select a track
number
start playback
confirm the
album selection
☞
In stop mode,
select a track
number
/
01 01
ALBUM TRACK
/
01 01
ALBUM TRACK
/ ➠
PROG
01 TRACK
10:80
➠ PROG
20 TRACK
98:80
repeat steps 2 and
3 to store other
tracks
stop programming
mode
start playback
☞
In stop mode,
select an album
number
select a track
number
ALBUM
TRACK
/
/ ➠ PROG
01 01 TRACK
10:80
ALBUM
➠ PROG
01 01 TRACK
10:80
ALBUM
to store other
tracks under the
same album, repeat
steps 4 and 5
to select tracks
from another album,
pressÇ and repeat
steps 2 to 5
stop programming
mode
start playback