Philips 42PFL5603D-F7 - Manual (Page 16)

ENGLISH
FRANÇAISE
ESP
AÑOL
EN-15
Change sound settings
This section describes how to adjust your sound settings.
Press 1. MENU on the remote control and select TV settings >
Sound.
Sound
Equalizer
Balance
Digital audio language
Alternate audio
Mono/Stereo
Incredible surround
AVL
BBE
TV Settings
TV menu
Settings assistant
Picture
Sound
Press 2. Î or ï to highlight a sound setting and press Æ to select the
setting.
Press 3. Î or ï to adjust the setting, and press OK to confirm the
change.
Press 4. Menu to exit.
Summary of sound settings
The following sound settings can be configured. Depending on the
sound source, some sound settings might not be available.
• Equalizer
Changes the bass and treble. Select a bar to change the setting.
Balance •
Sets the balance of the left and right speakers.
• Digital audio language
Available for digital channels only, when multiple languages are
broadcast. Lists available audio languages.
• Alternate audio
Available for analog channels only when a main and second audio
program (SAP) is available from the broadcaster. Select the main or
second audio program.
Mono/Stereo •
Select mono or stereo.
Incredible surround •
Sets modes for spatial or surround sound reproduction depending
on the broadcast signal or on signals from external input. Select on
or off.
• Automatic volume leveling (AVL)
Reduces sudden volume changes, for example, during commercials
or when switching from one channel to another. Select on or off.
• BBE
Restore clarity for better speech intelligibility and musical realism.
Select on or off.
• Delta volume
Levels out volume differences between channels or connected
devices. Switch to the connected device as described in Watch
connected devices on page 11 before changing the Delta volume.