Philips 220P2ES-00 - Manual (Page 10)

8
While keeping the release button pressed, tilt 3.
the base and slide it out.
Note
This monitor accepts a 100mm x 100mm VESA-
Compliant mounting interface.
Place the monitor face down on a smooth 2.
surface, taking care to avoid scratching or
damaging the screen. Then lift the monitor
stand.
100mm
100mm
2.3 Remove the Base
Condition:
For VESA standard mounting applications •
Before you start disassembling the monitor base,
please follow the instructions below to avoid
damage or injury.
Extend the monitor base to its maximum 1.
height.
220P2