Clock/timer, Sleep timer setting – Philips MC-I250-37 User Manual
Page 37
35
English
1
Press and hold
CLK / TIMER for more than
two seconds to select timer mode.
➜ "12:00 AM
12:00 AM
12:00 AM
12:00 AM
12:00 AM
" or "00:00
00:00
00:00
00:00
00:00
" or the last timer
setting starts flashing.
➜
starts flashing.
➜ The selected source will be lighted while
other available sources are flashing.
2
Press
CD, TUNER, INTERNET or PC LINK
to select the desired source.
➜ For CD mode, the timer will wake up by
playing the first track of the disc or favorite list. If
the disc tray is empty, it will switch to Tuner
mode.
➜ For Tuner mode, the timer will wake up by
playing the last tuned radio station.
➜ For INTERNET or PC LINK mode, the timer
will wake up by playing the last streamed music.
If the connection fails, it will switch to Tuner
mode.
3
Press
S or T (or ¡ / ™ on the remote
control) to switch between hour or minutes
setting.
➜ The hour or minutes digits flash.
4
Use the navigation jog (or press
3 / 4 on the
remote control) to set the hour and minutes.
5
Press
CLK / TIMER to store the timer.
➜ "TIMER
TIMER
TIMER
TIMER
TIMER
", the set timer "XX:XX
XX:XX
XX:XX
XX:XX
XX:XX
" and the
selected source will be displayed.
➜
remains on the display.
● At the preset time, the selected sound source
will play.
To exit without storing the setting
● Press Ç.
Note:
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
Checking the timer
● Press CLK/TIMER once on the remote
control.
➜ If the timer has been activated, the set timer
information is displayed.
Activate / deactivate the timer
● Press TIMER ON/OFF repeatedly on the
remote control.
➜ If activated, the last set timer information is
displayed for a few seconds.
➜ If deactivated, “TIMER OFF
TIMER OFF
TIMER OFF
TIMER OFF
TIMER OFF
” is displayed.
Sleep timer setting
The sleep timer enables the system to switch to
standby mode automatically at a preset time.
1
Press
SLEEP on the remote control repeatedly
to select a preset time.
➜ The selections are as follows (time in
minutes):
15
15
15
15
15
™ 30
30
30
30
30
™ 45
45
45
45
45
™ 60
60
60
60
60
™ 90
90
90
90
90
™ 120
120
120
120
120
™
OFF
OFF
OFF
OFF
OFF
™ 15
15
15
15
15
…
➜ "XX MINUTES
XX MINUTES
XX MINUTES
XX MINUTES
XX MINUTES
" or "OFF
OFF
OFF
OFF
OFF
" is displayed. "XX
XX
XX
XX
XX
" is
the time in minutes.
2
When you reach the desired length of time, stop
pressing the
SLEEP button.
➜
SLEEP
is shown, except for "OFF
OFF
OFF
OFF
OFF
" mode.
➜ The sleep timer is now set. Before the system
switches to standby mode, a countdown of 10
seconds is displayed.
"10 SECONDS
10 SECONDS
10 SECONDS
10 SECONDS
10 SECONDS
"
™ "9 SECONDS
9 SECONDS
9 SECONDS
9 SECONDS
9 SECONDS
"....
™ "1 SECOND
1 SECOND
1 SECOND
1 SECOND
1 SECOND
"
™ "SLEEP
SLEEP
SLEEP
SLEEP
SLEEP
"
To check the remaining length of time
after sleep timer is activated
● Press SLEEP once.
To change the preset sleep timer
● Press SLEEP again while the remaining sleep
timer is shown.
➜ The display will show the next sleep timer
options.
To deactivate the sleep timer
● Press SLEEP repeatedly until "OFF
OFF
OFF
OFF
OFF
" is displayed,
Clock/Timer