Philips 27PT8320-25 User Manual
Page 23
23
Y
our television comes with an on-screen
clock. During normal operation, the clock
appears on the screen when the STATUS/EXIT
button is pressed or if the TIMER DISPLAY
control is turned ON.
1
Press the MENU button on the
remote control to show the onscreen
menu.
2
Press the CURSOR DOWN button
twice to highlight FEATURES.
3
Press the CURSOR RIGHT button and
the menu will shift to the left. TIMER will
be highlighted.
4
With TIMER selected, press the CUR-
SOR RIGHT button again to shift the
display left and highlight the TIME con-
trol.
5
Press the CURSOR RIGHT button
again to highlight the time indicator area.
6
Press the CURSOR LEFT or CURSOR
RIGHT button to select the position or
digit you wish to enter.
7
Press the CURSOR UP or CURSOR
DOWN button to select the digits for the
time. Or press the NUMBERED but-
tons to enter the correct time.
8
Press the CURSOR RIGHT button to
move to the AM or PM position.
9
Press the CURSOR UP or DOWN
button to set AM or PM.
Press the STATUS/EXIT button to
remove the menu from the screen.
S
ETTING THE
TV C
LOCK
U
SING THE
T
IMER
C
ONTROL
PICTURE
SOUND
FEATURES
INSTALL
TIMER
ACTIVE CTRL
AutoLock
CLOSED CAP
FORMAT
FEATURES
TIMER
ACTIVE CTRL
AutoLock
CLOSED CAP
FORMAT
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
FEATURES
TIME
_ _:_ _ AM
START TIME
STOP TIME
CHANNEL
ACTIVATE
TIMER
TIME
10:30 AM
START TIME
STOP TIME
CHANNEL
ACTIVATE
TIMER
FEATURES
FEATURES
1
10
2
7
9
6
FEATURES
TIME
10:_ _ AM
START TIME
STOP TIME
CHANNEL
ACTIVATE
TIMER
FEATURES
3
4
5
6
8
7,9
7
Remember, be sure to press 0 first and then
the hour number for single-digit entries.
The Clock also can be set automatically using
the AutoChron
TM
feature found on page 4 of
the Quick Use and Installation Guide that
came with your television.
The TV’s clock settings may be lost when the
TV is unplugged (or when AC power to the set
is interrupted).
H
ELPFUL
H
INT
10
TIME
_ _:_ _ AM
START TIME
STOP TIME
CHANNEL
ACTIVATE
TIMER
FEATURES
NOTE: The TIMER Controls can also be
accessed by pressing the CLOCK button
on the remote control. See lower diagram
on this page.