Philips 228C3LHSB-00 - Manual (Page 30)

28
5. Power Management
5. Power Management
5.1 Automatic PowerSaving
If you have VESA DPM compliance display card
or software installed in your PC, the monitor can
automatically reduce its power consumption when
not in use. If an input from a keyboard, mouse or
other input device is detected, the monitor will
'wake up' automatically. The following table shows
the power consumption and signaling of this
automatic power saving feature:
!
Note
This data is subject to change without notice.
The following setup is used to measure power
consumption on this monitor.
Native resolution: 1920x1080.
Contrast: 50%
Brightness: 250 nits
Color temperature: 6500k with full white pattern
Power Management Definition (228C3L)
VESA
Mode
Video H-sync V-sync Power Used LED color
Active ON Yes Yes 20.23W (typ.) White
Sleep (typ.) OFF No No < 0.3W White
(Blinking)
Switch Off OFF - - < 0.3W OFF
Power Management Definition (228C3LH)
VESA
Mode
Video H-sync V-sync Power Used LED color
Active ON Yes Yes 20.79W (typ.) White
Sleep (typ.) OFF No No < 0.3W White
(Blinking)
Switch Off OFF - - < 0.3W OFF