Philips DC315-37B - Manual (Page 2)

Setup
2
1 In standby mode, press and hold
TIME SET/AUTO SCAN for 2
seconds.
The hour digits are displayed and »
begin to blink.
2 Press TUNING +/- to set the hour.
3 Press TIME SET/AUTO SCAN
to confi rm.
The minute digits are displayed »
and begin to blink.
4 Repeat steps 2-3 to set the minute,
year, month, day and 12/24 hour
format.
Set time and date A
1 In the tuner mode, press and hold
TIME SET/AUTO SCAN for
more than 2 seconds to activate
automatic program mode.
» All available stations are
programmed in the order of
waveband reception strength.
The fi rst programmed radio sta-
»
tion is broadcast automatically.
2 Press PRESET +/- to select a
preset number.
E Tip
Detailed functions and features are •
described in the user manual.
Program and listen to radio
stations
A Play from iPod/iPhone B
Setup
2
Set the alarm timer B
Repeat alarm
1 When the alarm rings, press
REPEAT ALARM/
BRIGHTNESS CONTROL .
The alarm repeats ringing
»
minutes later.
E Tip
You can press • TUNING+/- to adjust
interval to repeat alarm.
Stop alarm ring
1 When the alarm rings, press the
corresponding ALM 1 or ALM 2 .
The alarm stops but the alarm »
settings remain.
1 Place the iPod/iPhone in the dock.
2 Turn the adjuster to fi t the iPod/
iPhone.
Enjoy
23
1 Ensure that you have set the clock
correctly.
2 Press and hold ALM 1 or ALM 2
for 2 seconds.
» or and hour digits begin
to blink.
3 Press TUNING +/- repeatedly to
set the hour.
4 Press ALM 1 or ALM 2 to confi rm.
» or and minute digits
begin to blink.
5 Repeat steps 3-4 to set the minute.
6 Repeat steps 3-4 to select wheth-
er to ring alarm on weekdays or
at weekend.
7 Repeat steps 3-4 to select an
alarm sound source.
8 Repeat steps 3-4 to set the alarm
volume.
Activate and deactivate the alarm
timer
1 Press ALM 1 or ALM 2 repeatedly
to activate or deactivate the timer.
If the timer is activated, » or
is displayed.
If the timer is deactivated,
»
or disappears.
Enjoy
23
3 Press SOURCE repeatedly to
select iPod/iPhone source.
The connected iPod/iPhone »
plays automatically.
• To pause/resume play, press .
To skip to a track, press
• / .
To search during play, press •
and hold / , then release
to resume normal play.
DC315_37_QSG_EN.indd 5-7 DC315_37_QSG_EN.indd 5-7 2009-6-3 16:55:32 2009-6-3 16:55:32