Philips 42PFL7403D-27 - Manual (Page 11)

ENGLISH
FRANÇAISE
ESP
AÑOL
EN-9
3.6 Switch on and setup the TV
The TV switches on automatically after connecting the power cord.
Press the GREEN Next button located on your remote control to proceed.
Thank you for your purchase of this PHILIPS TV.
Please proceed with the following steps to set-up your TV. For
the BESTpossible picture performance, contact your local
Cable / Satellite signal provider for High Definition signal
options available in your area.
Next
Follow the on-screen instructions to select your language and complete
your TV setup. Installation takes approximately 10 minutes.
Note: D If you connect your TV to a cable box or satellite set-top
box, you do not need to install channels. Press the red button on
the remote control to exit the channel installation stage of the setup.
Finish the setup by selecting your location:
If you choose • Retail store your settings will be are erased each
time you turn off the TV. This mode is only to be used for retail
store displays.
If you choose
• Home you are guided through a choice of picture
display options. Use the left and right cursor to select your
preferred screen.