Bissell 3 9 5 0 - Manual (Page 14)

14
w w w . b i s s e l l . c o m
M
aintenance and care
Maintaining Pet TurboBrush
the pet turbobrush should be checked regularly
for clogs or debris wrapping around the brush.
1. Unplug the vacuum from electrical outlet.
2. If a clog is present or debris is visible, unscrew
the two screws on the back of the Pet
TurboBrush to remove the faceplate and clear
any obstructions.
3. To clean debris from the brush, remove the
brush from the drive belt and clean debris.
4. Reposition the drive belt on the brush.
Place ends of brush in slots on sides as
shown. Reposition faceplate and secure with
two screws.
2.
4.