Glen Dimplex Home Appliances Ltd FSE 60 DOP - Manual (Page 25)

23
PROGRAMMER / CLOCK
The programmer button
Your timer should have symbols like
the ones in the table below. It may
also be either TOUCH control or have
buttons.
The ‘function’ button in the centre is
used for setting the minute minder and
setting up the automatic cooking. See
below for details.
Symbols on the LED display.
This ‘A’ symbol appears
when either a semi, or
fully automatic program
is selected. This symbol
will flash while a program is being set.
Once a program is set the symbol will
light up, and remain lit until the alarm
sounds, or the program is cancelled
This Bell symbol appears when the
Minute Minder function has been
selected.
While the Minute Minder is being set,
the Bell symbol flashes.
Once the
length of time is set, the Bell symbol
remains lit until the time runs down, or
the function is cancelled.
This message and ‘A’ symbol appear
when you are asked to set the length
of time you require the oven to cook
automatically for. Using the Up and
Down buttons adjusts this accordingly.
This message and ‘A’ symbol appear
when you are asked to enter in an end
time, or when you would like the oven
to switch itself off.
Symbol Symbol What is it?
-
Down
Used to decrease cook / end time,
remove minutes from the minute
minder and adjust the time of day.
Also for listening to and setting the
alarm tone.
+
Up
Used to increase cook / end time,
add minutes to the minute minder
and adjust the time of day.
MODE
Function button
Used to select the functions available
on this timer.
Press once for: Minute Minder.
Press twice for: Cook time
Press three times for: End time.
How to use these functions is
explained later on in this section.