Forward-facing installation – Britax BOULEVARD 70 User Manual

Page 52

1 Loosen the harness.

a Lift harness adjuster lever
b Pull both harness straps forward

2 Remove the body pillow and

unbuckle the harness.

3 Pull the head restraint cover up,

then pull the seat cover forward

to access the forward-facing belt

path.

5 Push the child seat down while

pulling the vehicle belt to remove

all slack (see pages 10 – 11).

6 Attach and remove slack from the

Versa-Tether (if an anchor point is

available).

7 Store excess webbing in the

elastic strap.

8 Replace the cover.

4 Route the vehicle seat belt

through the forward-facing belt

slots, then buckle. Ensure the

vehicle belt is not twisted.

Forward-Facing Installation