beautypg.com

Philips Toaster User Manual

Page 7

background image

caution

- Do not let the mains cord hang over the edge of the table or worktop on which the

appliance stands.

- Avoid touching the metal parts of the toaster, as they become very hot during toasting.

Only touch the controls and lift the appliance by its plastic side panels.

- Do not place the toaster on a hot surface.

- Only connect the appliance to an earthed wall socket.

- Always unplug the appliance after use.

- The toaster is intended for household use only and may only be used indoors. It is not intended

for commercial or industrial use.

- If a slice of bread gets stuck inside the toaster, unplug the appliance and let it cool down before

you try to remove the bread. Do not use a knife or a sharp tool, as these may cause damage to

the heating elements.

- HD2627 only: The warming rack is only intended for warming up rolls or croissants. Do not put

any other ingredients on the warming rack, as this may lead to a hazardous situation.
Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled

properly and according to the instructions in this user manual, the appliance is safe to use based on

scientific evidence available today.

Before first use

Remove any stickers and wipe the body of the toaster with a damp cloth.

Before you use the appliance for the first time, we advise you to let the appliance complete a few

toasting cycles without slices of bread on the highest browning setting in a properly ventilated room.

This burns off any dust that may have accumulated on the heating elements and prevents

unpleasant smells when toasting bread.

using the appliance

1

Put the appliance on a stable and flat surface, away from curtains and other combustible

materials. Put the plug in the wall socket.

2

To adjust the length of the cord, wind part of it round the brackets in the base of the

appliance (Fig. 2).
toasting bread

Never let the toaster operate unattended.

1

Put one or two slices (HD2627) or one to four slices (HD2647) of bread in the

toaster (Fig. 3).

Tip: For the best toasting results, always put the slices in the centre of the slots.

2

Select the desired browning setting. (Fig. 4)

- Select a low setting (1-2) for lightly toasted bread and a high setting (5-7) for darkly toasted bread.

- HD2647: If you only toast one or two slices of bread, select the desired browning setting for the

side where you put the bread. If you toast three or four slices of bread, select the desired

browning settings for both sides of the appliance.

EnglisH

7