Binatone VEVA 1520 - Manual (Page 2)

If the call is from someone who withheld their number, e.g. by dialling 141,
will display.
If the call is from someone whose number is unavailable, e.g. an international
call or from a private exchange, “OUT OF AREA” will display.
If you've got new Caller Display records, the handset will display "X NEW
6.1 View the Call List
All received calls are saved in the Call List with the latest call at the top of the list.
When the call list is full, the oldest call will be replaced by a new call. Any
unanswered calls which have not been viewed are marked with a <*> icon at the
CALLS" in standby mode. The New Calls indication will remain until all the new
call records have been viewed.
centre of the bottom line of the display.
1. Press to access the call list.
OR Press
2. Press to select the desired entry.
3. Press <#> to view the caller’s number if applicable.
6.2 Store a Call List Number into the Phonebook
1. Follow Steps 1 and 2 in Section 6.1 .
2. Press ADD TO PB.
3. Press
4. Press
5. Edit the number if necessary.
6. Press
7. Press
4. Press
to display the date and time of the call. Press
previous screen.
6.3 Delete an entry in the Call List
1. Follow Steps 1 and 2 in Section 6.1 .
2. Press
3. Press
“ WITHHELD”
6 CALLER DISPLAY (NETWORK DEPENDENT)
This feature is available if you have subscribed to the Calling Line Identification
service with your network service provider. Your phone can store up to 10
received calls with date/time information in the Call List. The number will be
shown on the handset display when the phone is ringing. If the number matches
with one of the entries in your Private Phonebook, the caller's name stored in the
private phonebook will be displayed alternately with the number, and the
handset will ring with the ringtone associated with that phonebook entry.
17 18
Delete
1. Follow Steps 1 and 2 in Section 6.1.
. 2. Press
3. Press
4. Press
.
7 PHONE SETTINGS
Your phone comes with a selection of settings that you can change to
personalise your phone the way you like it to work.
7.1 Date and Time Settings
If you subscribe to Caller Display the time and date settings will be automatically
updated by the network when you receive an incoming call.
The Caller Display service only sends the month and date, not the year, so you
may need to set the year.
7.1.1
Change the Date Format
1. Press HS SETTINGS.
2. Press DATE & TIME.
3. Press DATE FORMAT.
4. Press
(DD-MM-YYor MM-DD-YY).
5. Press
7.1.2 Change the Time Format
1. Press HS SETTINGS.
2. Press DATE & TIME.
3. Press TIME FORMAT.
4. Press
5. Press
Set the Time
1. Press HS SETTINGS.
2. Press DATE & TIME.
3. Press SET TIME.
4. Press
5. Press
Note: If the time has been set before, the current time will display, otherwise,
“HH:MM” will display.
7.1.4 Set the Date
1. Press HS SETTINGS.
2. Press DATE & TIME.
3. Press SET DATE.
4. Press
5. Press
Note:
“DD-MM-YY ” will display.
You can set an alarm time on this phone. When an alarm is set, the
lcon> is shown on the handset display.When the alarm time is reached, the
and “ALARM ON ” flash on the handset display, and the alarm
tone rings for 45 seconds. You can press any key to disable the alarm. If the
snooze function is activated, the alarm will sound again at the end of the snooze
period of seven minutes. You can also press and hold while the
Note:
a. A key press will still disable the alarm even if the handset keypad is locked
b. The alarm volume level is the same as the settings of the handset ringer
volume. If the handset ringer is set to VOLUME OFF, the alarm still sounds
at VOLUME 1 level.
when the alarm rings.
( 12 HR or 24 HR).
c. During an external call or internal call, if an alarm is set and when the alarm
time is reached, the and “ALARM ON” will still flash. An
alarm tone will be emitted from the earpiece to alert the user the alarm time
is reached. Once the user presses any key or presses and holds.
d. During paging or ringing, the alarm will not sound when the alarm time is
reached. However, if the snooze function is enabled and there is no paging
7.2.1 Turn on/off the Alarm 1. Press HS SETTINGS.
2. Press ALARM.
4. Press
Note: If ON is selected, you will be asked to set the alarm time.
7.2.2
Set the Alarm Time (If Alarm time is set to be ON)
1. Follow Steps 1 to 4 in Section 7.2.1.
2. Enter the alarm time in 24 hour format.
3. Press to display "SNOOZE".
4. Press and to select snooze ON or OFF.
5. Press to confirm.
3. Press ON/OFF.
to disable the alarm, the display will revert to the call duration.
or ringing, the alarm will sound again at the end of the snooze period.
all Call list entries
alarm is sounding, to stop the alarm and turn off the snooze function.
19 20
in the format you set in Section 7.1.1.
7.3 Handset Settings
7.3.1 Set the Ringer Melody for Internal Calls 1. Press HS SETTINGS.
2. Press RING SETUP
3. Press INT RING.
4. Press
Note: The respective melody will be played while browsing the ringtone list.
5. Press
Set the Ringer Melody for External Calls
1. Press HS SETTINGS.
2. Press RING SETUP.
3. Press EXT RING.
4. Press
Note: The respective melody will be played while browsing the ringtone list.
5. Press
Set the Ringer Volume
1. Press HS SETTINGS.
2. Press RING SETUP.
3. Press RING VOLUME.
4. Press
VOLUME OFF).
Note: The respective ringer volume will be played during your selection.
If VOLUME OFF is selected, the icon will be displayed.
5. Press
Set Alert Tones
Three different alert tones are set on by default, but can be turned off, if desired.
Key Tone - a single beep is emitted when you press a key.
you need to charge the handset batteries.
1. Press HS SETTINGS.
2. Press TONE SETUP.
3. Press KEY TONE /
4. Press
5. Press
Out of Range Tone - emitted while you are talking on the phone to alert you to
move closer to the base unit, before the call is lost.
Low Battery Tone - emitted while you are talking on the phone to alert you that
BATTERY TONE / OUT OF RANGE.
7.3.5 Set the Handset Language
1. Press HS SETTINGS.
2. Press LANGUAGE.
3. Press
4. Press
7.3.6 Rename the Handset
1. Press HS SETTINGS
2. Press RENAME HS.
3. Press
4. Press
keys to enter up to 10 letters for the name.
7 .3.7 Choose the Information to be Displayed in Idle You can choose to display time or handset name in your idle screen.
1. Press HS SETTINGS.
2. Press HS DISPLAY.
3. Press HANDSET NAME or TIME.
4. Press
Set the Auto Answer
If you turn on the Auto Answer, you can answer a call automatically by just lifting
1. Press HS SETTINGS.
2. Press AUTO ANSWER.
3. Press
4. Press
the handset off the base or charger, without having to press any key.
7.4 Base Settings
7.4.1 De-register a Handset
This operation should only be necessary if one of your handsets becomes faulty
or lost and needs to be replaced.
You will need to enter the 4-digit System PIN (Default PIN is 0000) in order to
Note: You cannot de-register the handset that you are currently using.
1. Press
2. Press DELETE HS.
3. Press
the antenna icon flashing and "REGISTER" on the display.
de-register a handset from the base station.A de-registered handset will have
4. Enter the 4-digit system PIN.
5. Press
6. Press to scroll through the list of registered handsets and
7. Press
select the number of the handset you want to de-register.
21 22
BS SETTINGS.
7.4.2 Change the dial mode
1. Press BS SETTINGS.
2. Press DIAL MODE.
3. Press TONE or PULSE
(The current setting is indicated by an asterisk to the right).
4. Press
You should normally leave the dialling mode at its default setting of TONE (also
called DTMF) unless the phone is connected to an old exchange that only
Note: If PULSE dialling is set, you can press the * key to switch to TONE
recognises PULSE dialling.
7.4.3 Change the Flash (Recall) Time
1. Press BS SETTINGS.
2. Press FLASH TIME.
3. Press
4. Press
You may need to change the recall (flash) time if your phone is connected to a
PBX. The recall time options are SHORT (the default value of 100ms),
0ms) or LONG (600ms).
(SHORT, MEDIUM, LONG,
7.4.4 Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the base
station. It is used to protect your phone against unauthorized use. The default
system PIN code is 0000.
1. Press BS SETTINGS.
2. Press CHANGE PIN.
3. Press
4. Enter the old system PIN.
5. Press
6. Press
Note: If the new PIN entered in Step 6 is not the same as the new system PIN
entered in Step 5, you must enter the new system PIN at step 5 again.
7. Press
7.5 Registration
You can register additional handsets to have up to five handsets per base unit,
with each handset's number (1 to 5) shown on its display. (Note: each handset
1. Press and hold on the base station for more than five seconds, to
put the base station into registration mode. It will stay in registration mode
To register a new handset to your base:
within this time.
2. Press REGISTRATION.
3. Press
4. Enter the 4-digit system PIN (default 0000).
5. Press
If the handset registration is successful, you will hear a confirmation tone and
The handset will automatically be allocated the next available handset number.
This handset number is shown in the handset display in standby mode. If the
handsetregistration is unsuccessful, the will still flash and the
7.6 Reset Your Phone
You can reset your phone to the default settings . After a reset, all your
1. Press DEFAULT.
2. Press
3. Enter the 4-digit system PIN (default 0000).
4. Press
5. Press
can only be registered to one base.)
for about 1 minute, so the following handset sequence must be completed
30
with the current setting indicated by and asterisk
to the right).
IMPORTANT: When you purchase a phone system, all handsets are already
Handset registration is only necessary when you buy extra handsets or if a
handset has become faulty.
messages will be deleted but your phonebook remains unchanged.
ANSWERING MACHINE
Your phone includes a telephone answering machine that records unanswered
calls when it is on.The answering machine can store up to 59 messages within
incoming messages,you can record memos for other users of your phone.
alternately with the handsets name or time, depending on the handset standby
display mode set (see section 7.3.7), and you will have to delete some
the maximum recording time of approximately 15 minutes. As well as recording
8
messages before any new ones can be recorded.
MEDIUM (
the will stop flashing.
registered to your base, so you do not need to register them.
personal settings, call list entries, redial list entries, and answering machine
23 24
display will return to REGISTER, so you will need to repeat the registration
dialling for the rest of that call.
process.
If the answering machine memory is full, the Handset will display TAM FULL
1. Press
¾ If answering machine is set to OFF, will not display on the
handset LCD.
When new messages are recorded on the answering machine, the
flashes on the handset display until all the new messages are played.
After a new message is played it will be saved as an old message
Old messages will be played after all new messages are played completely.
1. Press
Note: A is placed at the centre of the bottom of the handset
When a message has been played, the will disappear and will
You can turn the answering machine on or off using the handset.
When the answering machine is set to ON, calls will be answered after the
set answer delay and the caller can then leave you a message.
When the answering machine is set to OFF, calls will be answered after 14
8.1 Turn On/Off the Answering Machine
Note: If there are no messages, the handset display will briefly show
then return to MSG PLAYBACK.
4. During message playback, press or to increase or decrease
the message playback volume respectively.
5. Press
PREVIOUS, DELETE to perform the following functions during message
STOP: Stop the current message playback and return to the
ANS. MACHINE menu.
FORWARD: Skip to play the next message. The date and time information
of the next message will display if there is another message.
PREVIOUS: Repeat playing the current message from the beginning.
The date and time information of the current message will display.
"00-00 00-00"
DELETE: Delete the current message and the next message will be played.
Note: Alternatively, you can use the following shortcut keys to control different
Press to stop message playback.
Press once to restart the current message from the beginning. Press
Press to skip forward to play the next message.
Press to delete the current message being played.
operations during message playback.
1. Press
You can record your memo message for another user. When you record a memo,
messages. Memo recording can still function even when the answering machine
1. Press
4. Press recording. The memo will play back for
OR
4. Press to stop memo recording without saving and return back to
ANS. MACHINE menu.
You can use the TAM SETTINGS menu through the handset to change the
settings of your answering machine.
8.3 Delete All Messages in the Answering Machine
8.4 Record Memo
8.5 Answering Machine Settings
not be able to leave you a message.
handset LCD.
automatically unless it is deleted.
not be shown when you listen to this message again.
25 26
screen displays the date and time information of the message received.
Some answering machine functions can be operated from the base, including
playing messages and turning the answering machine on or off. See section
"3.2 Base Station with Telephone Answering Machine (TAM) Control" for further
details of button operations.
The answering machine can also be controlled and set up using the
handset menu functions, as below.
is turned off.
twice to skip backward to play the previous message.
By default, the answer machine is set in ANS & REC mode which allows callers
to leave a message. This mode can be changed to ANSWER ONLY which
1. Press
ANSWER ONLY.
5. Press
The answering machine announces the outgoing message when it answers a call.
There is a pre-set OGM for each of
mode or ANSWER ONLY
You can record your own OGM for ANS & REC mode or ANSWER ONLY mode. When you record your own OGM, it will be used when the answering machine
answers the call. If your personal OGM is deleted, the pre-set OGM will be
1. Press
ANSWER ONLY.
5. Press
restored automatically.
1. Press
6. Press
7. Press
OGM will playback automatically.
Alternatively, press to return to the previous screen without
is displayed on the screen.
When your answering machine memory is full and the answer mode is in ANS
It will return to ANS & REC mode automatically after some messages have
,the answer mode will change to ANSWER ONLY automatically.
been deleted.
ANS & REC
OGM during playback and record a new one whenever you want.
Please note that pre-set OGM cannot be deleted.
You can playback your own personal OGM or the pre-set OGM for ANS &
REC mode or ANSWER ONLY mode and choose to delete your personal
1. Press
ANSWER ONLY.
5. Press
is displayed on the screen.
7. Press
menu.
Note: If a personal OGM has not been recorded, the pre-set OGM will be
1. Repeat Steps 1 to 6 in Section 8.5.4.1
2. Press while the OGM is playing to delete your personal OGM and
return to the previous menu and the pre-set OGM is restored automatically.
Note: If the pre-set OGM is playing, you are not allowed to delete it, so
You can set the number of rings before the answering machine answers and
starts playing your OGM. You can set the answering machine to answer after
two to eight rings or TIME SAVER.
1. Press
from 2 RINGS, 4 RINGS,
5. Press
will answer after 4 rings if there are no new messages, or after 2 rings if there
is a new message, so if you call in and you don't get an answer after 2 or 3
rings, you can hang up and save on call charges.
"PLAYING OGM"
You can set the maximum length of the recording time for each incoming
1. Press .
played.
pressing will just stop the playback and return to the previous menu.
mode, which can only be in English or French (Francais) on this model.
& REC
does not allow callers to leave a message. In that case, your callers will be
prompted to call back later.
27 28
If Time Saver is set the answering machine
6 RINGS, 8 RINGS or TIME SAVER.
2. Press
4. Press
5. Press
Three different compression rates (HIGH, MEDIUM and LOW) are provided for
rate, the higher the recording quality level attained, but the
1. Press
Press
rate.
5. Press
Your phone lets you check your messages, or otherwise operate your
When the answering machine is on and takes a call, you can listen to the caller
If the answering machine is set to ON, when there is an incoming message,
“SCREENING?”
1. Press
2. The handset will display “SCREENING”.
3. You can adjust the earpiece volume by pressing .
OR
3. Press to return to previous screen and you cannot hear the
recording.
At any time if you want to pick up the call, you can press and
the message recording will be stopped automatically. If the answering
the call in person.
you to select different quality levels of recording incoming message. The lower
the compression
machine is in the process of recording, the message already stored will be
saved.
leaving the message and decide whether to pick up the call or not.
Function
s
Key
s
While message is pla
y ing
2
Delete the
cu
rre
nt messag
e pl
ay
in
g.
4
Repeat playing the current message
5
Play the message
Stop the current message playback
6
Skip to play the next message
7 8
Stop the current message playback
9
Turn off the answeri
ng machine
from the beginning. Press twice to skip backward to play the previous message.
Turn o
n the a
nsweri
ng ma
chin
e
While message is not play
ing
shorter the total recording time available. ( LOW=7 minutes, MEDIUM=10
minutes, HIGH=15 minutes approx).
29 30
leaving a message. You can then identify the caller and decide whether to take
it will automatically be played through the base station, but you also have the
option to listen through the handset which will display
The 4-digit remote access PIN code is used to prevent other people from
unauthorised access of your answering machine.
message to be 60, 120, 180 seconds or unlimited up to the total recording time
remaining on the answer machine.
answering machine, by calling the answering machine when you are away from
home and then dialling a 4-digit remote access PIN from a tone-dialling phone.
UNLIMITED.
Problem Causes Solutions
No dialling tone when pressing
a.The connection cord of the base station is not
plugged in.
b.The adapter cord is not plugged in correctly in
the base station.
c. Another handset is using the base to make a call.
d. Wrong telephone line cord
a.Check the connections. Unplug and plug back in the mains.
Check that the telephone cord has been plugged into the base station and the phone socket.
b.Check the base station plug and the 230V plug (remove and plug-in).
c.Wait until the line is unoccupied. d.Use the original telephone line
cord supplied
When connect to a PBX, no and/or wrong connection after dialling.
Dialling prefix is needed. Insert the dialling prefix
"SEARCHING" is displayed. a. Base station out of range. b. Base station not connected to mains.
Reduce the range.
Connect base station to mains.
The call does not work. Service not activated or wrong setting Check your Subscription with
network or change the dial mode.
No display. Empty battery Recharge battery
key
Technical Support
If the fault persists...
Disconnect all other instruments connected to the same line as the phone
Disconnect the base unit from the telephone line and plug a different phone
This telephone is not equipped with a grounding function
used in PBX systems.
system and try to make a call.
, and therefore some
1. Press
4. Press
5. Press
6. Press
Note: If the new PIN entered in Step 6 is not the same as the new system PIN
entered in Step 5, you must enter the new system PIN at step 5 again.
7. Press
4. Press
5. Press
You can ring your phone from another tone-dialling phone to switch the
answering machine on or off, and/or listen to your messages remotely.
1. Place a call from a tone-dialling phone to your phone.
2. When the answering machine answers the call and starts playing the OGM,
Note: The * must be entered while the OGM is still playing, and the 4-digit PIN
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
Note: If the 4-digit Remote Access PIN is entered incorrectly you will hear three
consecutively, the line will be released automatically.
4. Press the following keys to carry out your desired function.
press the < * > key. The OGM will stop playing.
should be follow without any delays.
)XQFWLRQV
.H\V :KLOHPHVVDJHLVQRWSOD\LQJ :KLOHPHVVDJHLVSOD\LQJ
'HOHWHWKHFXUUHQWPHVVDJHSOD\ ing
5HSHDWSOD\LQJWKHFXUUHQWPHVVDJH
IURPWKHEHJLQQLQJ3UHVVWZLFHWRVNLS
EDFNZDUGWRSOD\WKHSUHYLRXVPHVVDJH
3OD\WKHPHVVDJH 6WRSWKHFXUUHQWPHVVDJHSOD\EDFN
6NLSWRSOD\WKHQH[WPHVVDJH
7XUQRQWKHDQVZHULQJPDFKLQH
6WRSWKHFXUUHQWPHVVDJHSOD\EDFN
7XUQRIIWKHDQVZHULQJPDFKLQH
Note: If your answering machine is switched off, the phone will enter into the
remote access mode after
14 rings and play the Answer Only OGM.
You can then enter the and the 4-digit remote access PIN (Default)
Remote Access PIN is 0000) to activate the remote access feature.
1. Press
9 TROUBLESHOOTING
Answering Machine
The unit does not record
new messages. The answering machine is turned off. Turn on the answering machine.
The caller cannot leave a message. a. The answering machine is turned off. b. Message memory is full.
a. Turn on the answering machine. b. Erase unnecessary messages.
I cannot operate the
answering machine remotely.
a. You are entering the
wrong remote access code
b. You are pressing the dial keys too quickly.
c. You are using a pulse telephone.
a. If you forget the remote access
code, reset to the default settings.
b. Press each key firmly. c. Try again using a touch tone phone
While recording an outgoing message or listening to
messages, the unit rings and recording stops.
A call is being received. Answer the incoming call
and try again to record your
out going message later.
c. ANSWER ONLY mode is set. . Change to ANS & REC mode. c
remote access on or off respectively.
31 32
To allow remote access this option must be turned ON, but you can turn it OFF
to prevent any remote access at all.
When your answering machine memory is full and the answer mode is set to
Answer & Record, the answer mode will change to Answer Only automatically.
It will change back to Answer & Record mode automatically after some
4-digit PIN code again.
4-digit PIN code.
(Default 0000).
messages have been deleted.
into the master telephone socket.
DECLARATION OF CONFORMITY
UK (Argos) Ver, Sep.2010
Try making a call. If this works, the line is OK.
If the cal l does not work, and you are using a two-way socket adapter, remove
it and plug a telephone directly into the socket. If the cal l now works, the adapter
may be faulty.
11
We the manufacturer / Importer : Binatone Telecom Plc,1 Apsley Way London, NW2 7HF.
Declare under our sole responsibility that the following product
Type of equipment:
Digital cordless telephone
Model Name:
Country of Origin:
China
Brand:
complies with the essential protection requirements of R&TTE Directive 1999/5/EC on
the approximation of the laws of the Member States relating to Radio Spectrum Matters,
Statesrelating to electromagnetic compatibility (EMC) and the European Community
Directive 2006/95/EC relating to Electrical Safety.
Assessment of compliance of the product with the requirements relating to the
essential requirements according to Article 3 R&TTE was based on Annex III of the
Directive 1999/5/EC and the following standard:
Radio Spectrum: EN 301406: V2.1.1(2009-07)
EMC: EN 301489-6:V1.3.1(2008-08)
EN 301489- :V1. .1(2008-0 )
Electrical Safety: EN 60950-1:2006+A1: 2009
Manufacturer / Importer
(signature of authorized person)
Date Signature
Binatone
The conformity to the requirements is validated by the symbol.
NOTE: In compliance with Directive 2002/96/EC, when you purchase a product
that comes with the symbol shown on the right, you are required to dispose of
electrical and electronic equipment by separate waste collection and you
cannot dispose of the product as normal waste.
This equipment and all its components, subsystems and consumable materials
formed an integral part of this product and when you decide to dispose
takethem to a local recycling centre for
appropriate waste disposal, in compliance with the current regulations.
Details about the location of these centres can be obtained from your local authority.
of them you have to
1520 Series
Notes for battery disposal
Your product contains batteries covered by the European Directive 2006/66/EC,
which cannot be disposed of with normal household waste.
Please be aware of the local rules on separate collection of batteries. The
correct disposal of batteries helps protect the environment and prevent health
10
hazards.
33 34
This product is guaranteed against manufacturing defects for a period of 1 Year.
This does not cover the product where the fault is due to misuse, abuse,
use in contravention of the instructions, or where the product has been
subject of commercial use.
In the event of a problem with the product within the guarantee period please
PRODUCT GUARANTEE
the subject of unauthorised modifications or alterations, or has been the
return it to your nearest Argos store.If the item is shown to have had an inherent defect present at the time of sale, the store will provide you with
a replacement.
Your statutory rights remain unaffected.
Guarantor; Argos Ltd
489 - 499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
the Council Directive 2004/108/EC on the approximation of the laws of the Member
2010
of the functions may be limited when
Veva
6.4
If the date has been set before, the current date will display, otherwise,
7.2 Alarm Settings
Record Your Own Outgoing Message (OGM) 8.5.3
Playback and Delete the Outgoing Message (OGM) 8.5.4
Playback the OGM 8.5.4.1
Delete a Personalised OGM 8.5.4.2
Set the Answer Delay 8.5.5
Set the Recording Time of Incoming Message 8.5.6
Call Screening 8.5.7
Set the Answer Mode 8.5.1
Set the Outgoing Message (OGM) Language 8.5.2
display to indicate that it is a new message.
8.2 Listen to the Messages in the Answering Machine
8.5.8 Change the Compression Rate
8.5.9 Activate Remote Access
8.5.9.1 Change the 4-Digit Remote Access PIN
8.5.9.2 Activate or Deactivate the Remote Access
8.5.9.3 Access Your Answering Machine Remotely
5 Dec
1 8 4
for internal calls.
total of 6 ringer volume levels including
for external calls.
delete letters and the alphanumeric
system PIN again.
system PIN.
saving the personal OGM.
you to check. Press
save the message.
displayed.
the message can be played back in the same way as answering machine
playback.
settings.
rings and the answer only message will be played to your callers. They will
error beeps, and you can try again, but if it happens three times.
You will hear a single confirmation beep if the PIN is accepted, and you then
need to press 5 to start playing any messages.