Blaupunkt HEIDELBERG CD50 - Manual (Page 25)

50
Equalizer
This car audio system is equipped with
a parametric digital equalizer. In this
case, parametric means that it is possi-
ble to individually raise or lower one fre-
quency (GAIN +10 to -20 dB) for each
of the five filters.
The following filters are available:
●
SUB LOW EQ 32 to 50 Hz
●
LOW EQ 63 to 250 Hz
●
MID EQ 315 to 1250 Hz
●
MID/HIGH EQ 1600 to 6300 Hz
●
HIGH EQ 8000 to 12500 Hz
These filters can be adjusted without the
use of measuring equipment. As a re-
sult, it is possible to significantly influ-
ence the in-vehicle acoustics.
Notes on making equalizer
settings
We recommend that you use a CD you
are familiar with to make the settings.
Before you set the equaliser, set bass,
treble, balance and fader to “0” and de-
activate the Loudness function. For
more information on how to do this, re-
fer to the section on “Tone and balance/
fader”.
➮
Now listen to the CD you have se-
lected.
➮
Evaluate the sound according to
your own personal preferences.
➮
Now refer to “Sound impression” in
EQUALIZER
the following table.
➮
Make the settings for the equalizer
as described under “What to do”.
Switching the equalizer on/off
➮
To switch the equalizer on, press
and hold down DEQ
<
until EQ
lights up in the display and “EQ
ON” appears briefly.
➮
To switch the equalizer off, press
and hold down DEQ
<
until EQ
no longer lights up in the display
and “EQ OFF” appears briefly.
Adjusting the equalizer
➮
Press DEQ
<
.
➮
Press or
:
to select
“DIGITAL EQ”.
➮
Press or
:
to select the filter.
➮
Press or
:
.
➮
To select the frequency, press
:
.
➮
To adjust the level, press or
:
.
➮
To select the next filter, first press
OK
;
and then or
:
.
➮
Once you have completed making
all of the necessary adjustments,
press DEQ
<
.