Philips SENSEO® Latte Select Kaffeepadmaschine - Manual (Page 24)

2 Place the 1-cup pod holder q with a used coffee pod in the coffee
machine. Close the lid and make sure that it is locked properly.
Note: Always put a used coffee pod in the pod holder when you descale the
machine. This pod serves as a ‘filter’ to prevent the sieve in the pod holder from
getting clogged with scale residues.
3 Mix 50 grams of citric acid with 1 litre of water in a measuring jug.
Stir until the powder has completely dissolved.
4 Remove the water reservoir and fill it with the descaling mixture.
Then put the water reservoir back onto the coffee machine.
5 Put a bowl with a capacity of at least 1.5 litres under the spout to
collect the descaling mixture.
6 Press the on/off button 3 to switch on the machine.
, The machine is ready for descaling when the light ring around the
on/off button lights up continuously.
ENGLISH
24