Hyundai H-1002 - Manual (Page 3)

3
AC operation
· Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home.
· Plug the corresponding end of cord into the AC socket on the rear of the set.
· Insert the plug into power supply.
CAUTION:
· When the set is only used with AC or is not used for 2 weeks or more, please remove the batteries, to avoid damage to the set from leakage of batteries.
· Always switch off the unit when not in use.
· Always unplug the appliance from power supply, when no use long time.
Stereo headphone connecting
· For private listening, insert 3.5 mm headphone into the stereo headphone jack.
· Adjust volume control regulator to the appropriate level as desired.
· When the stereo headphone jack is plugged, speaker will disconnect automatically.
Radio operation
· Set the FUNCTION switch to the RADIO position, thus the Power LED indicator should light up.
· Select your desired broadcasting band with BAND switch.
· Rotate the TUNING control regulator to receive the desired broadcast.
· Adjust the level and quality of sound with VOLUME control regulator.
· To turn off the radio, set the FUNCTION switch to TAPE position.
Antenna
· For FM, SW reception, adjust the telescopic antenna appropriately to obtain the best reception on the band selected.
· The AM, LW signal is picked up through the built-in ferrite antenna. The set should be placed to a position for the best reception.