Philips VisaCare Mikrodermabrasion User Manual
Page 12
3
Clean the treatment tip under the tap with hot water and some
washing-up liquid. If the exfoliation ring is dirty, let the tip soak in hot
water with washing-up liquid for 5-10 minutes. You can use the brush
to clean it. Make sure you clean the filter with the treatment tip
upside down to rinse off any dirt left in the filter. Dry the treatment
tip with a lint-free towel or let it air-dry.
4
Clean the handle with a damp cloth.
5
Place the dry treatment tip back onto the appliance.
6
Wipe the charging stand with a damp cloth.
Danger: Always keep the adapter and the charging stand dry. Never rinse
them under the tap or immerse them in water.
Clean the treatment tip after every use for hygienic reasons and to prevent
clogging of the filter. Only use washing-up liquid or an alcohol solution
(max. 70%) to clean the treatment tip.
Storage
Store the appliance with the treatment tip attached in the charging stand
or pouch.
Note: Do not store a wet treatment tip on the appliance or in the pouch.
Replacement
A worn and abrasive structure could lead to skin irritation. therefore the
treatment tip should be replaced every 6 months or earlier if the abrasive
structure is deformed or damaged. Replacement tips are available on our
website. The treatment tip can be identified by the product code. You can
find this code on the inside of the treatment tip.
Ordering accessories
To buy accessories or spare parts, visit www.shop.philips.com/service
or go to your Philips dealer. You can also contact the Philips Consumer
Care Centre in your country (see the worldwide guarantee leaflet for
contact details).
ENGLISH
12