Philips Dampfbügeleisen User Manual
Page 7
Drip Stop (types GC3135, GC3130, GC3128, GC3126,
GC3125, GC3120, GC3115 only)
This iron features a "Drip Stop" steam shut-off facility: the iron
automatically stops steaming at too low temperatures to prevent water
from dripping out of the soleplate. When this happens you may hear a
sound.
Vertical Shot of Steam (types GC3135, GC3130, GC3128,
GC3126, GC3125, GC3120, GC3117, GC3116, GC3115,
GC3114, GC3113, GC3112, GC3111, GC3110 only).
C
1
The Shot of Steam function can also be used when you hold
the iron in vertical position.
Never direct the steam towards people.
Automatic Anti-Calc (types GC3135, GC3130, GC3128,
GC3126, GC3125, GC3120, GC3117, GC3116, only).
C
1
The built-in Automatic Anti-Calc system reduces deposit of
scale and ensures a longer life of the iron.
Auto-shut-off (type GC3135, only)
C
1
An electronic safety device will automatically switch off the
iron if it has not been moved for a while.
◗ To indicate that the iron has been switched off, the red auto-off
pilot light will start blinking.
To heat up the iron again:
- Pick up the iron or move it slightly.
- The red auto-off pilot light will go out.The amber temperature pilot
lightmay come on, depending on the soleplate temperature.
- If the amber pilot light comes on after the iron is moved, wait for it to
go out before start ironing.
- If the amber pilot light does not come on after the irom is moved, the
iron is ready for use.
ENGLISH
7