beautypg.com

Power supply, Stereo headphone connecting, Radio operation – Hyundai H-1202 User Manual

Page 3

background image

3

· CAUTION: To reduce the risk of electric shock, do not remove cover (or back). Prefer servicing to qualified service personnel.

Power supply

Battery operation

· Open the battery compartment cover.

· Insert 6 batteries (UM-1). Please observe correct battery polarities or the set will not work.

· Close the battery compartment cover.

AC operation

· Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home.

· Plug the corresponding end of cord into the AC socket on the rear of the set.

· Insert the plug into power supply.
CAUTION:

· When the set is only used with AC or is not used for 2 weeks or more, please remove the batteries, to avoid damage to the set from leakage of batteries.

· Always switch off the unit when not in use.

· Always unplug the appliance from power supply, when no use long time.

Stereo headphone connecting

· For private listening, insert 3.5 mm headphone into the stereo headphone jack.

· Adjust volume control regulator to the appropriate level as desired.

· When the stereo headphone jack is plugged, speaker will disconnect automatically.

Radio operation

· Set FUNCTION switch to RADIO position.

· Select your desired broadcasting band with BAND switch.

· Rotate the TUNING control regulator to receive the desired broadcast.

· Adjust the level and quality of sound with VOLUME control regulator.

· To turn off the radio, set the FUNCTION switch to TAPE position.

Antenna

· For FM or SW reception, adjust the telescopic antenna appropriately to obtain the best reception on the band selected.

· The AM or LW signals are picked up through the built-in ferrite antenna. The set should be placed to a position for the best reception.