BT Freestyle 2000 - Manual (Page 14)

Freestyle 2000 Handset & Alarm Clock Radio Charger ~ 3rd Edition ~ 18.06.03 ~ 5501
At the base station:
Press and hold the PAGE button until
it beeps (about 10 seconds).
At the handset:
Press the MENU button.
The display will show REDIAL.
Press the DOWN button until the
display shows REGISTER HS.
Press the
✔
button.
The display will show BASE A.
Use the DOWN button to display the
base you want to register the handset
to e.g. A, B, C or D.
(It is not important which one you
choose, but it is suggested that
you use the same letter/number as
that shown on the other handsets
registered to this base.)
Page
Menu
ᮢ
ᮢ
11
SETTING
UP
Please note
Under ideal conditions, the handset batteries
should give about 12 hours talktime or 120
hours standby on a single charge. Optimum
times for talk and standby are only achieved
when the handset batteries are new and fully
charged.
Customer Helpline
If you experience any difficulties in
installing your Freestyle 2000 please contact
the Freestyle Helpline on
0870 240 3962
or email: -
[email protected]
4
Registering the handset to the
base station
Press the
✔
button to confirm.
The display will show a flashing
cursor and ENTER PIN.
Enter your PIN (factory setting 0000).
Press the
✔
button to confirm.
The display will show SEARCHING
and the letter/number of the chosen
base will flash.
When registration is complete, the
display will show the handset name
and number.
Please note
If the display shows NO BASE it means that
the handset could not find the base that you
selected. Please ensure that the base you are
registering to is within range and switched on,
and that you hold the
PAGE button until it
beeps before selecting the base on the handset.
If the display shows NOT POSSIBLE it means
that there are already 5 handsets registered
to the base. You will need to de-register one of
the other handsets before you can register
another one.