Brinkmann Ranch Fire Pit & Grill - Manual (Page 5)

NOTE: Make sure set screws inside
each pulley are clear of center
hole before crank shaft is
inserted in Step 6.
Step 5
Place the cooking grill on flat
surface. Insert lift assembly down
inside the channels of the cooking
grill as illustrated.
Step 6
Insert safety pins below cooking
grill to support the grill. Insert
crankshaft through the lift
assembly, first grill pulley, second
grill pulley and through the other
side of lift assembly.
NOTE: Make sure to insert crankshaft
from the same side of lift
assembly that the safety lock
nut is welded to.
Step 7
With the cooking grill hanging
freely, use an Allen wrench to
tighten the pulleys securely to the
crankshaft.
Safety Lock Nut
Pulley Set Screw
4
Safety Pins
Set screw
Set screw