Cd-changer mode clock time – Blaupunkt KIEL CD36 User Manual
Page 19

41
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Cancelling SCAN
To stop scanning,
➮
briefly press the MENU button
8.
The currently scanned track will then
continue to be played normally.
Note:
●
You can set the scanning time.
For further details, please read the
section entitled “Setting the scan-
ning time” in the “Radio mode”
chapter.
Pausing playback (PAUSE)
➮
Press button 3
:.
“PAUSE” appears in the display.
Cancelling pause
➮
Press button 3
: whilst pause
is activated.
Playback is resumed.
CLOCK time
Displaying the clock time
To display the clock time briefly,
➮
Press and hold down the SRC
button
2 until the clock time ap-
pears in the display.
Setting the clock time
To set the clock time,
➮
press the MENU button
8.
➮
Press the or button
7 re-
peatedly until “CLOCK SET” ap-
pears in the display.
➮
Press the button
7.
The clock time appears in the display.
The hours flash and can be adjusted.
➮
Adjust the hours using the /
buttons
7.
Once the hours are set,
➮
press the button
7.
The minutes flash.
➮
Adjust the minutes using the /
buttons
7.
➮
Press the MENU button
8 twice.
Selecting 12/24-hour clock
mode
➮
Press the MENU button
8.
“MENU” appears in the display.
➮
Press the or button
7 re-
peatedly until “24 H MODE” or “12
H MODE” appears in the display.
➮
Press the or button
7 to
switch between the modes.
CD-CHANGER MODE
CLOCK TIME
02Kiel_MalagaCD36 gb
15.02.2006, 11:59 Uhr
41