Billion Electric Company BIPAC 7100SV - Manual (Page 35)

Chapter 3 Configuration
31
3.4.3.3.1 Configuration
This screen contains settings for configuring VoIP SIP module.
SIP: Enable/Disable to use SIP as VoIP call signaling protocol.
SIP Registration: Enable/Disable to register a SIP account in the SIP server (refer Service Provider
section below) or not.
LocalSIPPort: Enter the local SIP port which device listens incoming request. (range from 5000 to 65535,
default value is 5060)
MediaBasePort: It is known as RTP port, provide the based value from the media (RTP) ports that are
assigned for various endpoints and the different call sessions that may exist within an end-point. (range
from 5000 to 65535, default value is 5000)
UserID: This parameter holds the registration ID of the user within the SIP registrar.
Password: This parameter holds the password used for authentication within SIP registrar.
AuthorizationUserID: Same as UserID.
DisplayName: This parameter will be appeared on the Caller ID.
G.711U: Set the priority of voice compression to be used in the voice codec. Priority 1 owns the first
priority and so on.
G.711A: Set the priority of voice compression to be used in the voice codec.