Hyundai H-1401 - Manual (Page 5)

4
· Press the SKIP AND SEARCH button once to skip back to previous track. Keep pressing to search for a particular point at high speed backward. Release
the button resume normal play.
Repeat mode
· Press the REPEAT button once for single track repeat playing.
· Press twice for all track repeat playing.
· To cancel repeat play, press REPEAT button.
Program mode
· Up to 32 tracks can be programmed for disc play in any order or the same track can be repeated up to 32 times. Before use, be sure to press the STOP
button.
· Press the PROGRAM button, the track number will flash on the display.
· Select a desired track by using the SKIP AND SEARCH buttons.
· Press PROGRAM button to confirm.
· Repeat steps described above to enter additional memories into the program if necessary.
· When all the desired tracks have been programmed, press PLAY button to play the disc in the order you have programmed.
· To stop the CD, press the STOP button.
NOTE: The program memory will be cleared only when the CD compartment is opened or turn off the CD or power supply.
· To remove the CD from the unit open the CD door.
· To turn off the CD player set FUNCTION switch to TAPE position.
Recording
Recording from radio
· Set the FUNCTION switch to RADIO position.
· Tune to the desired station by turning the TUNING control regulator.
· Insert a blank cassette into cassette compartment.
· Press the PLAY button and RECORD button on deck simultaneously to start recording.
Recording from CD
· Set FUNCTION switch to CD position.
· Insert your cassette tape in the cassette compartment.
· Activate the CD player.
· Press RECORD and PLAY buttons simultaneously to start recording.
· To stop recording temporarily, press the PAUSE button. To continue recording, press the PAUSE button again.
· Press STOP/EJECT button when finished. Then stop CD playback by pressing the CD STOP button of the CD player.