BenQ PB7200 - Manual (Page 8)

Introduction 4
BenQ PB7200/ PB7220/ PB7100 User’s Manual
External Control Panel
Power
Presses the Power key to turn the
projector on or off.
Source
Selects signal sources from among RGB-
1, RGB-2, YP
b P r, S-Video and Video.
Left Exit Right Menu
Menu will display the menu system on
screen. Press Menu again to access the
sub-menus. Left and Right help you
navigate among choices and settings in
the menus and sub-menus. However,
when the on-screen menu is not
activated, the Left and Right buttons
will function as Keystone -/+ hot keys.
Press the Exit button to go back to the
main menu. Press Exit again to leave the
menu system.
Auto
Automatically determines the best
picture settings for current received
signals.
Blank
Uses Blank to hide the screen image.
You can unseal the image gradually by
using the mouse of the remote control,
or simply press Blank to turn on the
image immediately.
Power indicator
It will light up or flash when the projector
is under operation.
Temp indicator
The Temp indicator will flash when the
system temperature is too high, which
may occur if the projector is operated
improperly. See "Temp Information" on
page 24 for more detailed information.
Lamp indicator
The Lamp Indicator will light up when the
lamp needs service or replacement. See
“Lamp Information” on page 22 for more
detailed information.
1
2
3 4 5 6
7
8
9
10
11