Beko HPS-100 - Manual (Page 6)

Operation instructions
1. Stereo / 5.1 Mode Selection
For stereo mode, please connect the sound source with Front L and Front R input terminal.
This unit is AC-3 and DTS compatible. For 5.1 sound effect, please connect it with 5.1 input
terminals.
2. Power On
Front panel operation
Press the Power button and once LED light flickers, this product is connected with power.
3. Master and Woofer Volume adjust
Remote control operation
①. Press button of “Master ∧ ” or “Master ∨ ” to increase or decrease the volume of whole
speaker system.
②.
Press button of “Woofer
∧ ” or “Woofer ∨ ” to increase or decrease the volume of whole
speaker system.
4. Power off
Front Panel Operation
Press the Power button again and once LED light diminishes, this product is disconnected
from power.