Philips SHAVER Series 9000 Nass- und Trockenrasierer User Manual

Page 26

Note: If you press the on/off button of the

SmartClean system during the cleaning program, the

program aborts. In this case, the rinsing or drying

symbol stops flashing.
Note: If you remove the adapter from the wall socket

during the cleaning program, the program aborts.
Note: 30 minutes after the cleaning program and

charging have been completed, the SmartClean

switches off automatically.
Replacing the cartridge of the SmartClean

System

- Replace the cleaning cartridge when the

replacement symbol flashes orange or when you

are no longer satisfied with the result.

Press the button on the side of the SmartClean

system (1) and lift the top part of the

SmartClean system (2).

Take the empty cleaning cartridge from the

SmartClean system and pour any remaining

cleaning fluid out of the cleaning cartridge.

You can simply pour the cleaning fluid down the sink.

Throw away the empty cleaning cartridge.

Unpack the new cleaning cartridge and pull the

seal off the cartridge.

Place the new cleaning cartridge in the

SmartClean system.

ENGLISH