BlueAnt X5 Stereo Bluetooth Headset - Manual (Page 18)

18 X5 Stereo Bluetooth Headset
Scatternet Connection
z Scatternet Connection refers to the ability of one Bluetooth device to
connect to two devices simultaneously. For the X5, this means
connecting the Headset to Bluetooth phone and Audio Streamer at the
same time.
z Via Scatternet connection, you can answer incoming call from a
Bluetooth phone while listening to music from audio device connected to
Audio Streamer.
z To establish Scatternet Connection, first pair and connect Headset with
Bluetooth phone to save X5 pairing information in phone. Next,
disconnect the X5 from phone and pair the X5 with Audio Streamer.
When paired and connected, disconnect the X5 from Audio Streamer by
switching both devices OFF.
z Establish connection between the X5 and Bluetooth Phone and then
power ON Audio Streamer to connect to the X5.
z On an incoming call while streaming audio from audio device, music will
stop followed by bell ring. Click MFB once to answer the call.
Phone Software
Please make sure you have the latest firmware upgrade for your Phone
especially if you are using a PDA Phone. Go to the support section of the
manufacturers’ website to check you have the latest version. Many new
PDA phones require a Bluetooth patch to improve Bluetooth functionality
from the original version.
Resetting Your Phone
As new phones become more like computers they become prone to
software and memory issues which may cause Bluetooth reconnection
issues. This can be fixed simply by turning the phone off and back on again.
The phone will be reset and the working memory cleared.
Leaving your phone on continually for weeks at a time can cause this to
happen so we recommend that you switch your phone off at least once a
fortnight to avoid any problems.
lf you experience this problem regularly call your phone's manufacturer for
a software upgrade at a service center. You may also be able to do this
online.
Note: For Scatternet Connection, always remember to first connect X5
with Bluetooth Phone and then to Audio Streamer. If you connect X5 with
Audio Streamer first, then you can’t connect to Bluetooth phone because
the Headset service available from X5 will be used up by Audio
Streamer.