BT Decor 400 - Manual (Page 11)

11
Wall-mounting
Your Decor 400 can be
wall-mounted using
the screws and wall
plugs provided.
Use the wall-mounting
template opposite as a
guide for the drill
holes.
Before you wall-mount
your Decor 400, check
that:
• the wall can support the
weight of the phone;
• the position you choose
leaves sufficient space
so that the phone is
clear of any obstruction
on the wall, such as a
shelf or cupboard.
Wall-mounting
template
W
all-mounting
3mm
hole
3mm
hole
73mm
1
2
3
4
5
Drive the screws into
the wall, leaving about
4mm free on which to
hang the phone.
Press the phone line
cable into the channel
on the bottom of the
phone, so that the
phone lies flat against
the wall.
Hang the holes on the
back of the phone over
the screwheads and
gently pull the phone
downward to make
sure it is securely in
place.
Rotate the handset
hook 180°, so that you
can hang up the
handset when the
phone is wall-mounted.
Drill two holes for the
screws and insert the
wall plugs provided
(if required).
WALL
WALL PLUG SCREW
73mm