Philips AVENT Baby-Fläschchenwärmer User Manual

Page 10

the maximum water level is approximately 1cm/0.4 inches under

the rim of the baby bottle warmer (which corresponds to adding

160ml/4.5oz of drinking water). An accurate water level ensures

correct warming performance. (Fig. 5)

Select the desired setting (Fig. 6).

Note: Experience teaches that babies may have a preference of temperature

of their milk. This can be due to personal preference or external factors (e.g.

environment temperature). All three settings ensure that the milk is warmed

to a safe end temperature which is comfortable for your child and preserves

nutrients and vitamins in the milk.

Press the on/off button to switch on the appliance. The light in the

button lights up to indicate that the baby bottle warmer is

on (Fig. 7).

Note: The baby bottle warmer starts warming up right after you press the

button. The appliance is equipped with a sensor which detects how much

milk needs to be warmed and at what starting temperature the milk is (room

or fridge temperature). Thanks to intelligent software, the baby bottle warmer

automatically warms the milk in about 9 to 10 minutes, independent of the

starting temperature of the milk, the amount of milk or the desired end

temperature.

The progress indicator starts to fill up gradually with white light to

show the progress of the milk warming process. (Fig. 8)

Note: The progress indicator shows the progress of the milk warming process.

The progress indicator starts flashing when the appliance is on. When the

first warming phase has been completed, the bottom segment lights up

continuously and the next segment starts flashing to show that the second

warming phase is in progress. These steps continue until the third warming

phase has been completed. Now the entire progress indicator lights up

continuously.
Note: During the warming process, the milk circulates to ensure even

warming.
Caution: Do not take the bottle out of the baby bottle warmer during

warming.

ENGLISH