Philips SENSEO® Cappuccino Select Kaffeepadmaschine - Manual (Page 3)

3
1
2
3
2
2
1
1
2
1 2
7
3
8
5
4
6
Cleaning the milk container unit
Pull up the lever and
remove the milk container
unit from the machine.
If you do not plan to froth
milk again straightaway,
rinse the milk container, the
milk container lid and the milk
tube under a hot tap within
30 min. after use.
For a reliable performance of the milk container unit and consistently good frothing results it is very important that
you clean it regularly and thoroughly.
1 If you do not plan to froth milk again straightaway, rinse the milk container unit within 30 min after use.
2 After the last use of the day, clean all parts of the milk container unit thoroughly.
Press the lid release lever, tilt
the milk container lid slightly
and pull it upwards off the
milk container.
Push back the steam inlet
and the steam tube, and
close the milk container
lid cover.
Open the milk container
lid cover.
Fasten the lid, slide the
milk container unit into the
machine and push down
the lever.
Pull the steam inlet forward
to open it. Then move it to
the right.
Pull the milk tube off the
milk container lid.
For thorough cleaning
after the last use of
the day: place all parts
opened and detached in the
dishwasher (recommended)
or use hot water with some
washing-up liquid.
9 8
Press button once
for 1 cup of black coffee.
Press button twice
for 1 cup of cappuccino.
Press button once
for 2 cups of black coffee.
Place one cup or two cups
under the spout openings.
Note: Make sure that the
cup tray cover is in place.
Tip: Pre-heat your cups with hot water to keep the coffee hot longer.