Binatone 2020 - Manual (Page 2)

5.4 Edit a Phonebook Entry
In idle:
1. Press to access the phonebook.
2. Press to select the desired phonebook entry.
3. Press EDIT.
4. Press to display the current name.
5. Edit the name and press .
6. Edit the number and press
7. Press to select the ringtone and press to confirm.
5.5 Delete a Phonebook Entry
In idle:
1. Press to access the phonebook.
2. Press to select the desired phonebook entry.
3. Press DELETE.
4. Press to confirm, and the entry will be deleted.
5.6 Delete the Entire Private Phonebook
1. Press to access the phonebook.
2.
3.
Press DELETE ALL. .
4.
Press to display .
Press to confirm. All entries will be deleted and the display will show
.
5.7 Check the Phonebook Usage
You can check how many phonebook entries are stored in your handset and
how many phonebook entries are available for you to store in the phonebook.
1. Press to access the phonebook.
2. Press
PB STATUS.
3. Press to display how much of the phonebook is being used,
for example <14/20 USED> means 14 entries are stored out of the total of 20
available spaces.
6 CALLER DISPLAY (NETWORK DEPENDENT)
This feature is available if you have subscribed to the Calling Line Identification
service with your network service provider. Your phone can store up to 10
received calls with date/time information in the Call List. The number will be
shown on the handset display when the phone is ringing. If the number matches
with one of the entries in your Private Phonebook, the caller’s name stored in the
private phonebook will be displayed alternately with the number, and the handset
will ring with the ringtone associated with that phonebook entry.
If the call is from someone who withheld their number, e.g. by dialling 141,
“WITHHELD”
will display.
If the call is from someone whose number is unavailable, e.g. an international
call or from a private exchange, “OUT OF AREA” will display.
If you've got new Caller Display records, the handset will display "X NEW
6.1 View the Call List
All received calls are saved in the Call List with the latest call at the top of the list.
When the call list is full, theoldest call will be replaced by a new call. Any
unanswered calls which have not been viewed are marked with a <*> icon at the
CALLS" in standby mode. The New Calls indication will remain until all the new
call records have been viewed.
centre of the bottom line of the display.
1. Press to access the call list.
OR Press then press OK.
2. Press to select the desired entry.
3. Press <#> to view the caller’s number if applicable.
6.2 Store a Call List Number into the Phonebook
1. Follow Steps 1 and 2 in Section 6.1.
2. Press ADD TO PB.
3. Press and then enter the name.
4. Press and the selected call list number is displayed.
5. Edit the number if necessary.
6. Press and to select the ringtone.
7. Press to store the phonebook entry and return to the calls list.
4. Press
the date and time of the call. Press to go back to the previous screen.
5.3 View a Phonebook Entry
In idle:
1. Press to access the phonebook.
2. Press to select the desired phonebook entry.
3. Press
VIEW.
4. Press and to review the name, number and ringtone
of the selected phonebook entry.
Note: If the number is more than 12 digits, press or
to view the remaining digits.
6.3 Delete an entry in the Call List
1. Follow Steps 1 and 2 in Section 6.1.
2. Press
3. Press to confirm.
6.4 Delete the entire list of the Call List
1. Follow Steps 1 and 2 in Section 6.1
. 2. Press
3. Press to display .
4. Press to confirm. All entries will be deleted and the display will show
.
7 PHONE SETTINGS
Your phone comes with a selection of settings that you can change to
personalise your phone the way you like it to work.
7.1 Date and Time Settings
If you subscribe to Caller Display the time and date settings will be automatically
updated by the
The Caller Display service only sends the month and date, not the year, so you
may need to set the year. (This is used to calculate the day for the time stamp
7.1.1 Change the Date Format
1. Press
HS SETTINGS.
2. Press and to select DATE & TIME.
3. Press and to select DATE FORMAT.
4. Press and to select your desired date format
(DD-MM-YY or MM-DD-YY).
5. Press to confirm.
7.1.2 Change the Time Format
1. Press
HS SETTINGS.
2. Press and to select DATE & TIME. 3. Press and to select TIME FORMAT.
4. Press and to select your desired time format
5. Press to confirm.
( 12 HR or 24 HR).
network when you receive an incoming call.
on answering machine models only).
7.1.3 Set the Time
1. Press
HS SETTINGS.
2. Press and to select DATE & TIME.
3. Press and to select SET TIME.
4. Press and then enter the time information in 24 hour format.
5. Press to confirm.
Note: If time has been set before, the current time will display, otherwise,
“HH:MM” will display.
7.1.4 Set the Date
1. Press
HS SETTINGS.
2. Press and to select DATE & TIME.
3. Press and to select SET DATE.
4. Press and then enter the date information. The date entered will be in
5. Press to confirm.
Note: If date has been set before, the current date will display, otherwise,
the date entered will be in the format you set in Section 7.1.1.
“DD-MM-YY ” will display.
7.2 Alarm Settings
You can set an alarm time on this phone. When an alarm is set, the
Icon> is shown on the handset display.When the alarm time is reached, the
and “ALARM ON” flash on the handset display, and the alarm
tone rings for 45 seconds. You can press any key to disable the alarm. If the
snooze function is activated, the alarm will sound again at the end of the snooze
period of seven minutes. You can also press and hold to , while
Note:
a. A key press will still disable the alarm even if the handset keypad is locked
b. The alarm volume level is the same as the settings of the handset ringer
volume. If the handset ringer is set to VOLUME OFF, the alarm still sounds
at VOLUME 1 level.
when the alarm rings.
the alarm is sounding,the snooze function.
c. During an external call or internal call, if an alarm is set and when the alarm
time is reached, the and “ALARM ON” will still flash. An
alarm tone will be emitted from the earpiece to alert the user the alarm time
is reached. Once the user presses any key or presses and holds
d. During paging or ringing, the alarm will not sound when the alarm time is
reached. However, if the snooze function is enabled and there is no paging
7.2.1 Turn on/off the Alarm
1. Press
HS SETTINGS.
2. Press and to select ALARM
4. Press to confirm.
Note: If ON is selected, you will be asked to set the alarm time.
7.2.2 Set the Alarm Time (If Alarm time is set to be ON)
1. Follow Steps 1 to 4 in Section 7.2.1.
2. Enter the alarm time in 24 hour format.
3. Press to display "SNOOZE".
4. Press and to select snooze ON or OFF.
5. Press to confirm.
7.3 Handset
Settings
7.3.1 Set the Ringer Melody for Internal Calls
1. Press HS SETTINGS.
2. Press and to select RING SETUP.
3. Press and to select INT RING.
4. Press and to select the melody you want to hear for
Note: The respective melody will be played while browsing the ringtone list.
5. Press to confirm.
3. Press and to select ON/OFF.
to disable the alarm, the display will revert to the call duration.
or ringing, the alarm will sound again at the end of the snoo
internal calls.
7.3.2 Set the Ringer Melody for External Calls
1. Press
HS SETTINGS.
2. Press and to select RING SETUP.
3. Press and to select EXT RING.
4. Press and to select melody you want to hear for external
Note: The respective melody will be played while browsing the ringtone list.
5. Press to confirm.
7.3.3 Set the Ringer Volume
1. Press
HS SETTINGS.
2. Press and to select RING SETUP.
3. Press and to select RING VOLUME.
4. Press and to select the desired ringer volume (a total of
6 ringer volume levels including VOLUME OFF).
Note: The respective ringer volume will be played during your selection.
If VOLUME OFF is selected, the icon will be displayed.
5. Press to confirm.
7.3.4 Set Alert Tones
Three different alert tones are set on by default, but can be turned off, if desired.
Key Tone - a single beep is emitted when you press a key.
you need to charge the handset batteries.
1. Press HS SETTINGS.
2. Press and to select TONE SETUP.
3. Press and to select KEY TONE / BATTERY TONE /
4. Press and to turn on or off these tones.
5. Press to confirm.
Out of Range Tone - emitted while you are talking on the phone to alert you to
move loser to the base unit, before the call is lost.
Low Battery Tone - emitted while you are talking on the phone to alert you that
OUT OF RANGE.
7.3.5 Set the Handset Language
1. Press
HS SETTINGS.
2. Press and to select LANGUAGE.
3. Press and to select the desired language.
4. Press to confirm.
7.3.6 Rename
the Handset
1. Press HS SETTINGS
2. Press and to select RENAME HS.
3. Press and change the name of your handset, using to delete
4. Press to confirm.
letters and the alphanumeric keys to enter up to 10 letters for the name.
7.3.7 Choose the Information to be Displayed in Idle
You can choose to display time or handset name in your idle screen.
1. Press HS SETTINGS.
2. Press and to select HS DISPLAY.
3. Press and to select HANDSET NAME or TIME.
4. Press to confirm.
7.3.8 Set the Auto Answer
If you turn on the Auto Answer, you can answer a call automatically by just lifting
1. Press HS SETTINGS.
2. Press and to select AUTO ANSWER.
3. Press and to turn on or off the auto answer feature.
4. Press to confirm.
the handset off the base or charger, without having to press any key.
calls.
7.4 Base Settings
1. Press
2. Press and to select BS RINGER.
3. Press and to select the desired ringer melody (a total of
for your selection)
Note : The respective ringer melody will be played while browsing the melody list.
Press to confirm.
7.4.1 Set the Base Ringer Melody
4.
5 melodies
7.4.4 Change the dial mode
1. Press BS SETTINGS
2. Press and to select DIAL MODE.
3. Press and to select TONE or PULSE
(The current setting is indicated by an asterisk to the right).
4. Press to confirm.
You should normally leave the dialling mode at its default setting of TONE (also
called DTMF) unlessthe phone is connected to an old exchange that only
Note: If PULSE dialling is set, you can press the * key to switch to TONE dialling
recognises PULSE dialling.
for the rest of that call.
7.4.5 Change the Flash (Recall) Time
1. Press BS SETTINGS.
2. Press and to select FLASH TIME.
3. Press and to select your desired flash time ( SHORT,
4. Press to confirm.
You may need to change the recall (flash) time if your phone is connected to a
PBX. The recall time options are SHORT (the default value of 100ms), MEDIUM
the right).
(250ms) or LONG (600ms).
MEDIUM, SHORT, MEDIUM, LONG, with the current setting indicated by
7.4.6 Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the base
station. It is used to protect your phone against unauthorized use. The default
system PIN code is 0000.
1. Press
BS SETTINGS.
2. Press and to select CHANGE PIN.
3. Press and you are requested to enter the 4-digit system PIN.
4. Enter the old system PIN.
5. Press and enter the new system PIN.
6. Press and enter the new system PIN again.
Note: If the new PIN entered in Step 6 is not the same as the new system PIN
entered in Step 5, you must enter the new system PIN at step 5 again.
7. Press to confirm
an asterisk to
7.5 Registration
If you have a multi-handset system, you already have more than one handset
registered to your base unit.
You can register additional handsets to have up to five handsets per base unit,
shown on its display. (Note: each handset
1. Press and hold on the base station for more than five seconds, to
mode. It will stay in registration mode
To register a new handset to your base:
with in this time.
2. Press REGISTRATION.
3. Press and you are requested to enter the 4-digit system PIN.
4. Enter the 4-digit system PIN.
5. Press to confirm, and the display will show SEARCHING.
If the handset registration is successful, you will hear a confirmation tone and the
will stop flashing.
The handset will automatically be allocated the next available handset number.
This handset number is shown in the handset display in standby mode. If the
tion is unsuccessful, the will still flash.
7.6 Reset Your Phone
You can reset your phone to the default settings . After a reset, all your
personal
settings and call list entries will be deleted, but your phonebook
1. Press
2. Press and you are requested to enter the 4-digit system PIN.
3. Enter the 4-digit system PIN.
4. Press to display CONFIRM?
5. Press to confirm, and the phone will be reset to its default settings.
8 ANSWERING MACHINE
7.4.3 De-register a Handset
This operation should only be necessary if one of your handsets becomes faulty
or lost and needs to be replaced.
You will need to enter the 4-digit System PIN (Default PIN is 0000) in order to
Note: You cannot de-register the handset that you are currently using.
1. Press BS SETTINGS.
2. Press and to select DELETE HS.
3. Press and the display shows "PIN?".
the antenna icon flashing and "REGISTER" on the display.
de-register a handset from the base station.A de-registered handset will have
4. Enter the 4-digit system PIN.
5. Press and the first handset number is displayed.
6. Press to scroll through the list of registered handsets and
7. Press to confirm, and the chosen handset will be de-registered.
select the number of the handset you want to de-register.
1. Press
2. Press and to select RING VOLUME.
3. Press and to select the desired ringer volume (a total of
volume levels including VOLUME OFF).
Note : The respective ringer volume will be played during your selection.
4. Press to confirm.
7.4.2 Set the Ringer Volume
Your phone includes a telephone answering machine that records unanswered
calls when it is on.The LED message counter (two digits seven segment display)
on the base will show the number of the messages when the answering machine
is on. The answering machine can store up to 59 messages within the maximum
recording time of approximately 15 minutes. As well as recording incoming
messages, you can record memos for other users of your phone. If the answering
machine memory is full, the Handset will display TAM FULL and the handset
name alternatively in standby, or display TAM FULL and the date/time
information in standby which depends on which kind of information (Handset
name or Date/Time – See Section 7.3.7) is selected to display in Standby.
8 .1 Turn On/Off the Answering Machine
You can turn on or off the answering machine through the base or handset.
When the answering machine is set to ON, calls will be answered after the set
answer delay and the caller can then leave you a message. When the answering
machine is set to OFF, calls will be answered after 10 rings and the answer only
message will be played to your callers. They will not be able to leave you a
message.
Through the Base:
1.
Press on the base station.
¾ If answering machine is set to ON, displays on the handset
LCD and the 7-seg LED on the base station will display the number of
¾ If answering machine is set to OFF, will disappear from the
handset LCD and the 7-seg LED on the base station will display - -.
incoming messages.
Through the Handset:
1. Press
2. Press and to select TAM ON/OFF.
3. Press and to select ON or OFF.
4. Press to confirm.
6 ringer
with each handset's number (1 to 5)
can only be registered to one base.)
put the base station into registration
for about 1 minute, so the following handset sequence must be completed
handset registra
remains unchanged.
Note: If there are no messages, the handset display will briefly show
then return to MSG PLAYBACK.
4. During message playback, press or to increase or decrease
the message playback volume respectively.
5. Press STOP, FORWARD, PREVIOUS,
DELETE to perform the following functions during message playback.
STOP: Stop the current message playback and return to the ANS. MACHINE
menu.
FORWARD: Skip to play the next message. The date and time information
of the next message will display if there is another message.
PREVIOUS: Repeat playing the current message from the beginning.
The date and time information of the current message will display.
"00-00 00-00"
DELETE: Delete the current message and the next message will be played.
Note: Alternatively, you can use the following shortcut keys to control different
Press to stop message playback.
Press once to skip to repeat playing the current message from the
Press to skip to play next message.
Press to delete the current message playback.
beginning.Press twice to skip backward to play the previous message.
operations during message playback.
8.4 Record Memo
You can record your memo message for another user. When you record a memo,
the message counter will increase by one and the message can be played back
in the same way as answering machine messages. Memo recording can still
function even when the answering machine is turned off.
1. Press ANS. MACHINE.
2. Press and to select MEMO.
3. Press to start memo recording and “RECORDING ” is displayed.
4. Press to stop memo recording and save the memo.
OR
4. Press to stop memo recording without saving and return back to
ANS. MACHINE menu.
8.5 Answering Machine Settings
You can use the TAM SETTINGS menu through the handset to change the
settings of your answering machine.
8.5.1 Set the Answer Mode
By default, the answer machine is set in ANS & REC mode which allows callers
to leave a message. This mode can be changed to ANSWER ONLY which does
not allow callers to leave a message. In that case, your callers will be prompted
1. Press ANS. MACHINE.
2. Press and to select TAM SETTINGS.
3. Press and to select ANSWER MODE.
4. Press and to select ANS & REC or ANSWER ONLY.
5. Press to confirm.
8.5.2 Set the Outgoing Message (OGM) Language.
The answering machine announces the outgoing message when it answers a call.
There is a pre-set OGM for each of ANS & REC mode or ANSWER ONLY
to call back later.
8.5.3 Record Your Own Outgoing Message (OGM)
You can record your own OGM for
ANS & REC mode or ANSWER ONLY mode.
When you record your own OGM, it will be used when the answering machine
answers the call. If your personalised OGM is deleted, the pre-set OGM will be
1. Press ANS. MACHINE.
2. Press and to select TAM SETTINGS.
3. Press and to select OGM SETTINGS.
4. Press and to select ANS & REC or ANSWER ONLY.
5. Press and to select RECORD MESS.
restored automatically.
1. Press ANS. MACHINE.
2. Press and to select TAM SETTINGS.
3. Press and to select TAM LANGUAGE.
4. Press and to select your desired OGM language.
5. Press to confirm.
6. Press to start recording your personalised OGM and “RECORDING”
7. Press to stop and save your personalised OGM. Your newly saved
OGM will playback automatically.
Alternatively, press to return to previous screen without saving the
is displayed on the screen.
personalised OGM.
¾ If answering machine is set to ON, displays on the handset
LCD and the 7-seg LED on the base station will display the number of
¾ If answering machine is set to OFF, will disappear from the
handset LCD and the 7-seg LED on the base station will display - -.
incoming messages.
8 .3 Delete All Messages in the Answering Machine
Delete all messages through the Base:
In idle:
1. Press and hold on the base station.
2. All the old messages will be deleted.
Note: New messages will not be deleted. If there are no more messages in the
answering machine, “00’’ will display on the base station.
Delete all messages through the Handset:
1. Press
Press and to select DELETE ALL.
2. Press to confirm.
3. Press to delete all old messages.
Note: If there are no more messages in the answering machine, “EMPTY” will
ANS. MACHINE menu.
2.
display and return back to
Listen to the Messages in the Answering Machine
When new messages are recorded on the answering machine,
flashes on the handset display and the message counter on base flashes with
played after all new messages are
mpletely. The message counter LED stays steady to indicate the
ages stored in the answering machine.
Listen new messages through the Base:
1. Press on the base station.
8.2
in the answering machine until all the new
2. The new messages are played from the loudspeaker on the base station in
the sequence they are recorded.
3. Press <+> or <-> to increase or decrease the volume during message
playback respectively.
Note: If there are no new messages, “00” will display steadily in the message
counter on the base. Press will have no effect and an alert tone is emitted.
Listen new messages through the Handset:
1. Press
time information of the message received.
Note: is placed at the centre of the bottom of the LCD to indicate
message. If this message has been read or
will disappear and will be reflected next time when you listen to
that it is a new listened, the
this message again.
the number of new messages
messages are played. Old messages will be
played co
number of old mess
mode,which can only be in English on this model.
2. Press and to select TAM SETTINGS.
3. Press and to select RECORD TIME (Available options:
60S, 120S, 180S, or UNLIMITED)
4. Press and to select your desired recording time.
5. Press to confirm.
8.5.7
Call Screening
When the answering machine is set to ON and when there is an incoming
Function
s
Key
s
While messa
ge is pla
y ing
2
Delete the
cu
rre
nt messag
e playba
ck
4
Repeat playing the current message
5
Play the messag
e
Stop the current messag
e playba
ck
6
Skip to play the next message
7 8
Stop the current messag
e playba
ck
9
Turn off the a
nsweri
ng ma
chin
e
*
Enter the 4-di
git remote a
cce
ss PIN
from the beginning. Press twice to skip backward to play the previous message.
Turn o
n the a
nsweri
ng ma
chin
e
8.5.7.1 Turn Base Screening On or Off
You can listen via the base speaker to callers leaving a message, before deciding
whether to take a call or to leave the answering machine to record a message. The
SETTINGS menu on your handset.
message, At any time if you want to pick up the call, you can press
on the handset and the message recording will be
stopped automatically. If the answering machine is in the process of recording,
the message already stored will be saved.
call screening can be turned on or off using the
1. Press ANS. MACHINE.
2. Press and to select TAM SETTINGS.
3. Press and to select SCREENING.
4. Press and to select ON or OFF.
5. Press to confirm.
8.5.8 Change the Compression Rate
Three different compression rates (
HIGH, MEDIUM and LOW) are provided for
rate, the higher the recording quality level attained.
1. Press ANS. MACHINE.
2. Press and to select TAM SETTINGS.
3. Press and to select COMPRESSION.
4. Press and to select your desired compression rate.
5. Press to confirm.
8.5.9 Activate Remote Access
Your phone lets you check your messages, or otherwise operate your answering
machine,by calling the answering machine when you are away from home by
entering a 4-digit remote access PIN on a tone-dialing phone. Use the 4-digit
remote access PIN code to prevent other people from unauthorized access of
8.5.7.2 Handset Screening
You can listen via the base speaker to callers leaving a message, before deciding
whether to take a call or to leave the answering machine to record a message. The
SETTINGS menu on your handset.
8.5.9.1 Change the 4-Digit Remote Access PIN
1. Press
ANS. MACHINE.
2. Press and to select TAM SETTINGS
29
While messa
ge is not pla
y ing
call screening can be turned on or off using the
you to select different quality levels of recording incoming message. The lower
8.5.4.1 Playback the OGM
1. Press
ANS. MACHINE.
2. Press and to select TAM SETTINGS.
3. Press and to select OGM SETTINGS.
4. Press and to select ANS & REC or ANSWER ONLY.
5. Press and to select PLAYBACK.
6. Press to playback your current OGM and
the screen.
7. Press to stop the OGM playback and return to the previous menu.
Note: If a personalised OGM has not been recorded, the pre-set OGM will be played.
8.5.4.2 Delete the Personalised OGM
1. Repeat Steps 1 to 6 in Section 8.5.4.1
2. Press while the OGM is playing to delete your personalised OGM and
return to the previous menu and the pre-set OGM is restored automatically.
Note: If the pre-set OGM is playing, you are not allowed to delete it, so pressing
will just stop the playback and return to the previous menu.
8.5.5 Set the Answer Delay
You can set the number of rings before the answering machine answers and
starts
playing your OGM. You can set the answering machine to answer after
two to eight rings or TIME SAVER.If Time Saver is set the answering machine
1. Press ANS. MACHINE.
2. Press and to select TAM SETTINGS.
3. Press and to select ANSWER DELAY (Available options:
2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS or TIME SAVER).
4. Press and to select your desired answer delay.
5. Press to confirm.
will answer after 5 rings if there are no new messages, or after 2 rings if there is
a new message, so if on call charges. you call in and you don't get an answer
after 2 or 3 rings, you can hang up and save on call charges.
"PLAYING OGM"
8.5.6 Set the Recording Time of Incoming Message
You can set the maximum length of the recording time of the incoming messages.
1. Press ANS. MACHINE
Please note that pre-set OGM cannot be deleted.
8.5.4 Playback and Delete the Outgoing Message (OGM)
You can playback your own personalised OGM or the pre-set OGM for ANS &
mode or ANSWER ONLY mode and choose to delete your personalised
is displayed on
REC
OGM during playback and record a new one whenever you want.
/
the compression
your answering machine.
3. Press and to select CHANGE PIN.
4. Press to enter the Old PIN. (Default Remote Access PIN is 0000).
5. Press to enter the New PIN.
6. Press to enter the New PIN again.
Note: If the new PIN entered in Step 6 is not the same as the new system PIN
entered in Step 5, you must enter the new system PIN at step 5 again.
7. Press to reconfirm.
4. Press and to select ON or OFF to turn the remote
5. Press to confirm.
8.5.9.3 Access Your Answering Machine Remotely
You can ring your phone from another tone-dialing phone to switch the
answering machine on or off, and/or listen to your messages remotely.
1. Place a call from a tone-dialing phone to your phone.
2. When the answering machine answers the call and starts playing the OGM,
Note: The * must be entered while the OGM is still playing, and the 4-digit PIN
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
Note: If the 4-digit Remote Access PIN is entered incorrectly three times
consecutively, the line will be released automatically.
4. Press the following keys to carry out your desired function .
access on or off respectively.
press .
should be follow without any delays.
Functions Keys While message is not playing While message is playing
2 Delete the current message playback
4 Repeat playing the current message from the beginning.Press twice to skip
backward to play the previous message.
5 Play the message Stop the current message playback
6 Skip to play the next message
7 Turn on the answering machine
8 Stop the current message playback
9 Turn off the answering machine
* Enter the 4-digit remote access PIN
Note: If your answering machine is switched off, the phone will enter into the
remote access mode after 1 rings.
You can then enter the the and the 4-digit remote access PIN (Default
Remote Access PIN is 0000) to activate the remote access feature.
8.5.9.2 Activate or Deactivate the Remote Access
1. Press ANS. MACHINE.
2. Press and to select TAM SETTINGS.
3. Press and to select REMOTE ACC
When your answering machine memory is full and the answer mode is in ANS &
change to ANS & RECORD mode automatically after some messages have
RECORD,the answer mode will change to ANSWER ONLY automatically. It will
been deleted.
Problem Cause Solutions
No dialing tone when
pressing
a.The connection cord of the base station is not plugged in.
b.The adapter cord is not plugged in correctly in
the base station. c. Another handset is using the base to make a call.
d. Wrong telephone line cord
a.Check the connections. Unplug
and plug back in the mains. Check that the telephone cord has been plugged into the base station and the phone socket.
b.Check the base station plug and the 230V plug (remove and plug-in).
c.Wait until the line is unoccupied. d.Use the original telephone line cord supplied
When connect to a PBX,
no and/or wrong connection after dialing.
Dialing prefix is needed. Insert the dialing prefix
"SEARCHING" is displayed. a. Base station out of range. b. Base station not
connected to mains.
Reduce the range.
Connect base station to mains.
The call does not work. Service not activated or wrong operator or wrong setting
Check your Subscription with
network or change the dial mode.
No display. Empty battery Recharge battery
Answering Machine
The unit does not record
new messages.
The answering machine is
turned off.
Turn on the answering machine.
The caller cannot leave a message. a. The answering machine is turned off. b. Message memory is full.
a. Turn on the answering machine. b. Erase unnecessary messages.
I cannot operate the
answering machine
remotely.
a. You are entering the wrong remote access code b. You are pressing the dial keys too quickly.
c. The answering machine is turned off. d. You are using a pulse telephone.
a. If you forget the remote maccess
code, reset to the default settings.
b. Press each key firmly.
c. Turn on the answering machine.
d. Try again using a touch tone phone
While recording an outgoing message or listening to messages, the unit rings and recording stops.
A call is being received. Answer the incoming call
and try again to record your
out going message later.
Technical Support
If the fault persists...
Disconnect all other instruments connected to the same line as the
Disconnect the base unit from the telephone line and plug a different phone into
the master telephone socket.
Try making a call. If this works, the line is OK.
If the cal l does not work, and you are using a
two-way socket adapter, remove
it and plug a telephone directly into the socket. If the call now works, the adapter
may be faulty.
If you cannot make a call, the fault may be on the exchange line. Contact the
service provider (the BT engineers on 151 for UK only, or your cable company).
If you still cannot identify the cause of the problem, please read out the serial
number of this telephone to the Binatone Customer Service Center. The serial
number can be found in the battery compartment after having the batteries
For technical support, call Binatone Customer Service at 0845 345 9677(UK only).
10 DECLARATION OF CONFORMITY
The conformity to the requirements is validated by the symbol.
removed.
Please contact the technical support of the network provider for further information.
This telephone is not equipped with a grounding function! Therefore some of the
functions may be limited when used in PBX systems.
NOTE: In compliance with Directive 2002/96/EC, when you purchase a product
that comes with the symbol shown on the right, you are required to dispose of
electrical and electronic equipment by separate waste collection and you
cannot dispose of the product as normal waste.
This equipment and all its components, subsystems and consumable materials
formed an integral part of this product and when you decide to dispose
takethem to the local recycling centres for
appropriate waste disposal, in compliance with the current regulations.
Details about the location of these centres can be obtained from
your local authority.
9 TROUBLESHOOTING
UK (BTP) Ver 1, May 2008
We the manufacturer / Importer : Binatone Telecom Plc, 1 Apsley Way London, NW2 7HF.
Declare under our sole responsibility that the following product
Type of equipment: Digital cordless telephone
Model Name:
Country of Origin: China
Brand:
complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the approximation of the laws of the Member States relating to Radio Spectrum Matters,
the Council Directive 89/336/EEC on the approximation of the laws of the Member
Statesrelating to electromagnetic compatibility (EMC) and the European Community
Directive 2006/95/EC relating to Electrical Safety.
Assessment of compliance of the product with the requirements relating to the
essential requirements according to Article 3 R&TTE was based on Annex III of the
Directive 1999/5/EC and the following standard:
Radio Spectrum:
EN 301406: V1.5.1:2003;
EMC: EN 301489-1:V1.5.1:2005;
EN 301489-6:V1.2.1;2002;
Electrical Safety: EN 60950-1:2006.
Manufacturer / Importer
(signature of authorized person)
03 Apr 2008
Date Signature
of them you have to
key
I rus 2020 system and try to make a call.
Icarus 2020
Binatone
17 18 19 20 21 22
28 27 26 25 24 23
30 31 32 33 34
ca
0