Philips SatinPerfect Epilierer - Manual (Page 9)

guarantee and service
If you need service or information or if you have a problem, please visit the Philips
website at www.philips.com/support or contact the Philips Consumer Care
Centre in your country. You find its phone number in the worldwide guarantee
leaflet. If there is no Consumer Care Centre in your country, go to your local
Philips dealer.
troubleshooting
This chapter summarises the most common problems you could encounter with
the appliances. If you are unable to solve the problem with the information below,
contact the Consumer Care Centre in your country.
Problem Possible
cause
Solution
The epilator
does not
work.
The socket to
which the
appliance is
connected
does not
work.
Make sure the socket is live. If you connect the
epilator to a socket in a bathroom cabinet, you
may need to switch on the light in the
bathroom to make sure the socket is live. You
could also use a working socket outside the
bathroom.
During use,
the epilator
becomes hot
and suddenly
stops
working. Then
the speed
lights flash
red for 30
seconds.
The overheat
protection
has been
activated.
The epilator is equipped with integrated
overheat protection, which prevents the
epilator from becoming too hot. If the
overheat protection is activated, the appliance
switches off automatically. Then the speed lights
flash red for 30 seconds. To reset the overheat
protection, let the appliance cool down and
then switch it on again. To avoid overheating of
the epilator, do not press the epilator too hard
onto your skin .
EnglIsH 9