B&K AVR212 - Manual (Page 21)

17
SPEAKER OUTPUTS
C
FRONT
LEFT
L
SURROUND LEFT SURROUND RIGHT
FRONT
RIGHT
CENTER
PLUS
MINUS
PLUS
MINUS
PLUS
MINUS
FRONT LEFT FRONT RIGHT
(-) (+)
R
CENTER
(-) (+)
(-) (+)
SURROUND
LEFT
(-) (+)
Sl
SURROUND
BACK LEFT
(-) (+)
Sbl
SURROUND
BACK RIGHT
(-) (+)
Sbr
SURROUND
RIGHT
(-) (+)
Sr
PLUS
MINUS
PLUS
MINUS
PLUS
MINUS
PLUS
MINUS
SURROUND BACK
LEFT
SURROUND BACK
RIGHT
Five-way binding posts are provided, one pair for each channel. They are designed to accept a banana-type plug
or spade lug connector (shown below) and are color coded for easy identification. The red (+) post should always
be connected to the speaker’s red (+) jack. The black (-) post should always be connected to the speaker’s black
(-) jack.
Spade connector Banana jack
The amplifier section of the receiver will produce 150 watts / channel into 8 ohms. See SPECIFICATIONS for
more information. Here is a typical receiver output setup: