Philips Satinelle Ice Premium Epilierer - Manual (Page 16)

Problem Possible cause Solution
The appliance is
not switched
on.
Switch on the appliance.
You did not
attach the
epilating
head correctly.
Place the epilating head on the
appliance and press it onto the
appliance until it snaps home
(‘click’).
Skin irritation
occurs.
You used the
epilator for the
first time or
after a long
period of
disuse.
Some skin irritation may occur the
first few times you use the
appliance. This is absolutely normal
and usually disappears quickly. For
tips to reduce skin irritation, see
the first section of chapter ‘Using
the appliance’. Also make sure you
keep the epilating head clean.
You have
applied too
much pressure
to the appliance
Do not use any pressure when
you move the appliance over skin
The leg skin
cooler is not
cold enough.
You did not
freeze the leg
skin cooler long
enough.
Put the skin cooler without the
insulating sleeve in the freezer or
freezing compartment (***) for at
least 4 hours. When the colour of
the fluid has changed from white
to completely blue, the skin cooler
is ready for use.
You did not put
the leg skin
cooler in the
freezer or
freezing
compartment.
Put the skin cooler without the
insulating sleeve in the freezer or
freezing compartment (***) for at
least 4 hours. Do not store the
skin cooler in the refrigerator.
EnglisH 16