Bluetake Technology BT400 G5 - Manual (Page 8)

8
Battery Notice!
1. Over extended periods of time, battery gradually wears down and requires longer charging
time. The situation is normal. Additionally, the more you talk on the phone with the headset,
the less standby time your battery has.
2. Risk of explosion if battery is replaced by incorrect type or is thrown into fire.
3. Do not store the headset in hot areas. High temperatures can shorten the life of internal
electronic components, damage battery, and warp or melt certain plastics.
4. Do not store the headset in cold areas. When it warms up to the normal temperature, moisture
can form inside, which may damage internal electronic circuit board.
Charger Notice!
Use only chargers approved by Bluetake for use with this product. The use of any other types
will invalidate any approval or warranty applying to the product, and may cause unexpected
damage. For availability of approval chargers, please check with your local dealer.
- Turn ON/OFF Your Headset -
Press and hold the < POWER/MUTE > button for 5 seconds,
and then the headset will emit two high tones. When the power is
ON, the indicator LED starts to blink
BLUE color.
(NOTICE: the headset will enter pairing mode if you press and hold the <
POWER/MUTE > button for 7 seconds from OFF status.)
To turn off the headset, press and hold the < POWER/MUTE >
button for 2 seconds then the headset will emit two high tones
and the indicator LED displays
RED color briefly.