Philips SENSEO® Viva Café Kaffeepadmaschine - Manual (Page 21)

Flushing the coffee machine
If you have not used the coffee machine for one
day, you have to flush the machine with fresh water
before you use the machine again.
To flush the boiler, brew two cups of hot water in
the following way:
1 Fill the water reservoir with cold water at least
up to the MIN level and put it back into the
machine.
2 Put the 1-cup pod holder q or the 2-cup pod
holder qq in the machine without pod(s).
3 Close the lid and lock the lever.
4 Put two cups or a bowl under the coffee spout
to collect the water.
5 Press the on/off button 3.
, The light ring flashes slowly while the water
heats up. Heating up takes approx. 75 seconds.
, The coffee machine is ready for use when
the light ring lights up continuously.
6 Press the 2-cup button qq to brew two cups
of hot water.
7 Throw away this water. Now the machine is
ready for use again.
EnglisH 21
4222_200_0343_5_DFU Booklet_Lux_A6_v2.indd 21 6/25/13 8:30 AM