Blue Rhino Outdoor Charcoal Barbecue Grill NB1854WRT User Manual
Page 3
Outdoor Charcoal Barbecue Grill Model No. NB1854WRT
Contact 1.800.762.1142 for assistance. Do not return to place of purchase.
page no.
3
Step
2
Attach handle and air damper
A. Attach handle to bottom bowl using 2 sets of heat resistant washers (I), small
washers (G), large lock washers (K), large wing nuts (F).
B. Attach air damper to bottom bowl using 2 sets of small screws (A) and small
wing nuts (E).
Step
3
Attach legs and wheels
A. Attach front legs and wheel legs to bottom bowl using 4 sets of leg cups, large
washers (H), and large screws (C).
Note: Do not tighten large screws (C) until bottom support grid is attached.
B. Attach bottom support grid to front legs using 2 sets of small washers (G) and
large wing nuts (F).
C. Attach wheels and bottom support grid to wheel legs using 2 sets of wheel
nuts (D).
D. Tighten all 4 large screws (C).
Step
4
Attach top lid to bottom bowl
A. Attach lid to bottom bowl using 4 sets of small screws (A) and small wing
nuts (E).
B. Insert support clips.
Step
5
Insert warming rack
A. Slide warming rack into holes in lid and bottom bowl.
Note: Look for corresponding holes on side of lid. Insert short wire ends into lid
holes, one side at a time. Position warming rack legs into slots on grill body sides.
B. Cut zip tie on warming rack.
Step
6
Insert charcoal grid and cooking grid
Place charcoal grid and cooking grid into bottom bowl.
Step
7
Completed
Congratulations your assembly is now complete. Read Operating Instructions
before proceeding.