Philips MiniVac Aspirateur à main - Manual (Page 12)

storage
1 You can store the vacuum cleaner and the accessories on the
charger or in the storage bag. (Fig. 22)
replacement
We advise you to replace the inner filter after a prolonged period of use
or if you can no longer clean it properly.
Replacing the inner filter
1 Remove the filter unit from the dust compartment (Fig. 16).
2 Turn the outer filter anticlockwise (1) and remove it from the filter
holder (2) (Fig. 19).
3 Gently turn the inner filter anticlockwise (1) and remove it from
the filter holder (2) (Fig. 23).
4 Place a new inner filter on the filter holder (1) and turn it
clockwise to attach it (2) (Fig. 24).
5 Push the tip of the inner filter inwards (Fig. 25).
6 Place the outer filter on the filter holder (1) and turn it clockwise
to attach it (2). (Fig. 20)
7 Put the filter unit back into the dust compartment (Fig. 21).
Note: Make sure you insert the filter unit in the correct way.
ordering accessories
To purchase accessories for this appliance, please visit our online shop at
www.shop.philips.com/service. If the online shop is not available in
your country, go to your Philips dealer or a Philips service centre. If you
have any difficulties obtaining accessories for your appliance, please
contact the Philips Consumer Care Centre in your country. You find its
contact details in the worldwide guarantee leaflet.
New inner filters are available under type no. FC8035. Contact your
Philips dealer.
English 12