Bosch GSM 908 - Manual (Page 21)

MESSAGES
22
How to read a message again
1. Press to enter the List menu system.
2. Select Messages and press SELECT
3. Select Inbox by pressing OK
4. Scroll through the list of messages and
confirm your choice by pressing SELECT
How to send a message
Before you can send a message you have to enter
your network operator's telephone number for
this special service. Contact your network opera-
tor to obtain this number. On page 34 you can see
how you enter this special phone number and
how to select validity period, transmission format
etc. once for all. If you do not specify these para-
meters in the Setup menu system you will be
asked for a specification each time you wish to
send a message.
1. Press to enter the List menu system.
2. Select Messages and press SELECT
3. Select New message by pressing OK
Start entering your message using the keypad in
the same way as you enter a name or a tele-
phone number in the phone book.
moves the
cursor to the left, moves the cursor to the
right. Delete unwanted characters by pressing
CLEAR .
If you want to use the -symbol in your SMS
message press the -key briefly twice.
4. End your message by pressing OK
5. Select whether you wish to
Send message
at once or whether you wish to
Save message
for sending it later on.
6. Confirm your choice by pressing SELECT
Having selected Send message the phone
will ask for a phone number to send the message
to. Either enter a phone number or select one
from your phone book using
The message is automatically stored in Outbox
under Messages in the List menu system.
Favourite messages
Your phone contains a list of frequently
used messages, e.g.
The meeting .. is moved to ..
You only need to insert name, place or time in the
empty spaces. You may also add or delete words,
as required.
1. Press to enter the List menu system.
2. Select Messages and press SELECT
3. Select Favourites and press OK
4. Select the message you want to use and
confirm by pressing SELECT
The cursor automatically points at the first empty
space. Once you have filled this in, you can move
the cursor to the next empty space simply by
pressing
NEXT . The cursor can also be moved
forward and backward by pressing or
respectively.
5. Complete the message by pressing OK
6. Send the message, or save it for later use.
GSM 908 GB 29/04/99 12:05 Side 22