Blaupunkt CD33 - Manual (Page 18)

39
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Scanning tracks (SCAN)
You can briefly play all the tracks on a
CD.
➮
Hold down the MENU button
7
for
longer than two seconds.
Note:
●
You can set the scantime. For fur-
ther details, read the section enti-
tled “Setting the scantime” in the
“Radio mode” chapter.
Stopping SCAN and continuing
playback
To stop scanning,
➮
briefly press the MENU button
7
.
The current track will then continue to
be played.
Repeating tracks (REPEAT)
If you want to repeat a track,
➮
press button 4 (RPT)
:
.
RPT appears in the display. The track is
repeated until you deactivate RPT.
Cancelling REPEAT
If you want to cancel the repeat func-
tion,
➮
press button 4 (RPT)
:
again.
RPT disappears. Normal playback is
then continued.
Pausing playback (PAUSE)
➮
Press button 3 ( )
:
.
“PAUSE” appears in the display.
Cancelling pause
➮
Press button 3 ( )
:
while in
pause mode.
Playback is continued.
Changing the display
To switch between the track number dis-
play and the track number / playing time
display,
➮
Press the MENU button
7
.
➮
Keep pressing the or button
5
until “CD DISP” appears in the
display.
➮
Press the button
5
.
The current setting is displayed. “TIME”
for the playing time display and “PLAY”
for the track number display.
➮
Press the button
5
to select the
required setting.
➮
Press the MENU button
7
twice.
Removing the CD from the unit
To remove the CD from the unit,
➮
keep the SRC button
6
pressed until the CD is ejected.
CD MODE