Seat and mirror memory – BMW AG User Manual

Page 47

Seat and mirror memory*

You can memorise and call up three dif-
ferent driver's-seat and outside-mirror
position settings.

The setting for the lumbar support
is not stored in memory.

Memorising

1. Ignition key in position 1 or 2
2. Select a seat and outside-mirror

position

3. Press the M

EMORY

button: the telltale

light in the switch comes on

4. Press memory button 1, 2 or 3: the

telltale light goes out.

Calling up

Do not call up a memorised set-
ting while driving, as an unex-

pected seat movement could represent
an accident risk.

Ignition key position 1:
> Press the appropriate memory button

1, 2 or 3 briefly.
The adjusting movement is inter-
rupted immediately if a seat position
adjustment switch or one of the
memory buttons is pressed.

With the driver's door closed and the
ignition key either removed or in posi-
tion 0 or 2:
> Press memory button 1, 2 or 3 until

the adjusting procedure has been
completed.

If the M

EMORY

button was pressed acci-

dentally: press the button a second
time; the telltale light will go out.

You can have your car pro-
grammed to ensure that your pre-

ferred seat and outside-mirror positions
are selected whenever you unlock the
car with your own personal remote con-
trol key.

When this setting is used, make
sure that the footwell behind the

driver's seat is clear. Otherwise per-
sons or animals could be injured or
damage could be caused by the seat if
it moves backwards.

Overview

Controls

Maintenance

Minor repairs

Data

Keywords