Bosch HWD - Manual (Page 4)

English 2
Figure 1: Warming Drawer Overall Dimensions
Cabinet Cutout Dimensions Instructions are based on standard American cabinets 36" (914 mm) high x 24"
(609 mm) deep with a 25" 635 mm) countertop. If using non-standard cabinets, to
alter dimensions accordingly.
Cabinet opening bottom must be able to support 90 pounds (41 kg). Otherwise,
use the support brackets provided. If using the brackets, the sidewalls must sup-
port 45 pounds (20.5 kg) each.
Figure 2: Cabinet Cutout Dimensions
Table 1: Warming Drawer Overall Dimensions
Dimension Model
27” (685mm) 30” (762mm)
A 11 1/4” (285.8mm) 11 1/4” (285.8 mm)
B 26 5/8” (676.3 mm) 29 1/4” (743 mm)
C 22 1/4” (565.2 mm) 22 1/4” (565.2 mm)
D 20 1/2” (520.7 mm) 20 1/4” (514.4 mm)
D
B
A
E
C
Table 2: Cabinet Cutout Dimensions
Dimension Model
27” (685 mm) 30” (762 mm)
A 25 3/4” (654.1 mm) 25 3/4” (654.1 mm)
B 10” (254 mm) 10” (254 mm)
1/2"
(12.7mm)
1/2" (12.7mm)
Frame Overlaps
Cabinet
Frame
Overlaps
Cabinet
1-1/2" (38.1mm) Min. to
opening ( see item 4)
Wall
Receptacle
Allow 3-1/2" (88.9mm) in front
for drawer handle clearance
Support
Brackets
A
C
D
D
B
8"
(203.2mm)