Philips Salon Airstylist Control Brosse coiffante - Manual (Page 12)

Problem Solution
Perhaps you failed to switch the appliance on. Make
sure the appliance is plugged in. Then switch it on by
selecting the preferred setting.
The appliance may have overheated and switched
itself off. Unplug the appliance and let it cool down
for a few minutes before you switch it on again.
The appliance may not be suitable for the voltage to
which it has been connected. Make sure that the
voltage selector has been set to the local mains
voltage.
If the mains cord is damaged, you must have it
replaced by Philips, a service centre authorised by
Philips or similarly qualified persons in order to avoid
a hazard.
EnglisH 1