B&K Series 2 - Manual (Page 12)

1. Headphone Jack - Headphones having a standard ¼” (6.3mm) stereo plug can be connected to the
headphone output.
2. Source Selector - Turning the selector clockwise or counterclockwise will cycle through the available
inputs. Available inputs are V1, V2, TV, DVD, CD, SAT, TAPE, FM and AM.
3. Front panel buttons -
4. Display - The preamplifier display contains a 16 character display. It will display current status of the
preamplifier and any changes being performed.
5. Main power switch - Removes all power to the preamplifier. Normal operation of the preamplifier requires
the power switch to remain on. Use the ON/STANDBY button for daily on and off of the preamplifier.
ON/STANDBY places the unit in standby mode that allows turning back on with the remote control. Only turn
the preamplifier off with the main power switch when not using the preamplifier for an extended period of
time.
6. Volume control - Turning the volume control clockwise increases the volume level, counterclockwise
decreases the volume level. The volume knob is also used to change other preamplifier settings.
10
FRONT PANEL DESCRIPTION
SLEEP Toggles the preamplifier in and out of standby mode, (ON or OFF).
PRESET Cycles through audio presets for instant preset recall.
ENTER Confirm Selection. Presets, menu options, unit status.
DOWN & UP
Steps through audio options or menu selections when in the menu system.
Allows AM/FM tune - (down) or tune + (up).
MODE Steps through audio modes
MENU Enters into and out of the menu system.
Reference 51 Series 2