beautypg.com

Grill alert, Operation, Location of indicators – Brookstone Brookstone.grill alerttalkingremote thermometer 330654INS User Manual

Page 5

background image

GRILL ALERT

OPERATION

1. Connect MEAT PROBE CONNECTOR to TRANSMITTER SOCKET.

2. Turn on the transmitter by pressing and holding the POWER for two

seconds. Light will flash on LED.

3. Turn on the monitor by pressing and holding POWER for two seconds.

The LCD SCREEN will illuminate.

4. Check RECEPTION ICON

. It indicates whether or not you’ve

established signal connection by flashing.

IMPORTANT: If you have not established a signal connection, check
the following:

Check synchronization of transmitter and monitor by pressing both

RESET buttons within 60 seconds of each other to synchronize units
and establish signal. On the monitor, RESET is located in the battery
compartment, and on the transmitter RESET is located on the outside of
the battery compartment. (See Location of Indicators illustration on
page 7.)

• Shorten the distance between transmitter and monitor. (Maximum

transmission range is 300 feet.)

• Check batteries and replace if necessary.

5. Select the meat you are cooking by pressing SELECT until your desired

meat appears on the display: BEEF, LAMB, VEAL, HAMBURGER, PORK,
TURKEY, CHICKEN or FISH.

8

LOCATION OF INDICATORS

MONITOR AND TABLE STAND

A. POWER - Turns the unit on/off. Press and hold for two seconds to activate unit.

B. SELECT - Selects the type of meat (BEEF, LAMB, VEAL, HAMBURGER, PORK,

TURKEY, CHICKEN and FISH).

C. COOK - Selects the doneness of certain types of meat (RARE, MED RARE,

MEDIUM and WELL DONE).

D. LIGHT (

) - Turns the screen backlight on for three seconds.

E. TABLE STAND - Secures the unit on a flat surface.

F. LCD SCREEN - F1-RECEPTION ICON.

F2-MEAT SELECTION
F3-DONENESS WITH BAR GRAPH
F4-TARGET TEMPERATURE
F5-CURRENT TEMPERATURE
F6-BATTERY LOW INDICATOR

G. BELT CLIP - Clips onto a belt for mobility.

H. BATTERY COMPARTMENT AND DOOR - Accommodates two AA (UM-3)

batteries (not included).

I. VOLUME (LO/HI) - Adjusts the volume for alert signals (low or high). Unit

factory-set on high.

J. RESET - Returns all settings to their original values and synchronizes the

transmitter and monitor.

330654INS grill aler

t Instruc

tions D

o

c.

Siz

e

:5

"W x 4.75"H

Output at 100% P

rints 1/0 Black

5

330654_INS NEW Grill Alert 3/18/05 9:21 AM Page 9